开云体育

Yes, the UBitx is a nice piece of engineering. Hats off to the developers. For myself, I don't listen to AM broadcasts for their music content rather I listen to the BBC and other foreign stations to

Linux doesn't show hidden files by default. But you can see them by typing: ls -al in a terminal window when you're in the directory you want to examine. To hide a file, rename it with a dot ('.')

Another thing to watch out for, at least it's something that has caused me some grief at times when loading the tft files on various displays... You may get a message on the display that the load

Michael Thanks for your suggestion. i will implement them before the beta version is over. Ian KD8CEC 2018-06-25 11:04 GMT+09:00 Michael Babineau <mbabineau.ve3wmb@...>:

Jack: That helps, but now I get other errors. There are also lots of warnings. invalid conversion from 'const byte* {aka const unsigned char*}' to 'uint8_t* {aka unsigned char*}'

They are obsolete. Just had them lying around like you do. Howard

We've had some really long threads here about switches and fuses and diodes and such. Here's a few of them: ? ??/g/BITX20/topic/7489182 ?

I just want to pass on some discoveries I made today while upgrading my uBTIX to run KD8CEC V1.094 with a 2.8' Nextion Display. If you follow Ian's instructions at ?(

I have an 862D but to remove the nano I'd cut the old one out with snips if I didn't have a desoldering iron, which I do. Vince.

I don't think Farhan meant to return anything from the function. As a test, change the function's signature from: ?? int menuBand(int btn){ to ?? void menuBand(int btn){ and see what happens. I

Early Dmos parts.? They are good, I still have some in the collection along with VN66ak and a few VMP4s.? Whos selling them now? Allison

Ian :? I am very impressed with KB8CEC v1.094, this plus the Nextion Display is a real game changer for the uBITX !? It feels like I am now using a new radio ;-)? Can I make a suggestion for some

Any files that appear in the sketch directory are assumed to be part of the sketch and are included by the IDE. Each file will have its own tab in the Source Code Window. Jack, W8TEE

I accidentally blew the IRF510 out. I didn't have any, but I found some VN88AFD parts. They produce the same power out on all bands as the IRF510 did. They have much less gate capacitance, so should

Whoops ... the 250 mA is for the whole rig.? The Raduino + Nextion Display should account for 41 mA + 108 mA ?~= ?149 mA. So the current through the L7805 on the Raduino Board should be about 150

Michael Perfect !!! I considered using a $ 2 price regulator for RPI on ebay, but decided to cancel. I will disassemble another transceiver to find the heat sink Ian 2018-06-25 10:37 GMT+09:00

Today I upgraded my uBITX (v3) to use KD8CEC v1.094 and a Nextion 2.8" display, so I am now able to answer my previous question about current draw of the display and whether the L7805 regulator on the

So, then, regarding the wire-up of the jack/switch/fuse/et cetera:? Positive pole of jack to one pole of fuse: other pole of fuse to one pole of switch: other pole of switch to red and brown wires of

Thanks Don, I'll try some RG-174 then.? I might not have time until Wednesday, flying out tomorrow for a two day trip, but will report back when I try it. I assume one coax with shield to ground at

As I worked on my uBitx I made changes . . .duh . . doesn't everybody? As I progressed I found I forgot what I had hooked to what. I used cardboard for my front panel to help make a template for