开云体育

I'm surprised by the position of the authors and sellers of the transceiver. despite the obvious shortcomings main board of version 4, they did not recognize the problem, do not comment on the

I have exactly the same problems.

“ IF anything I'd take the 10K and spit it into 2 2.7K with one end connected to the emitters the other of the series pair to the base and in the center 10uf to ground.“ Starting with the V4

Worth Waiting For. Thanks Ian. wrote:

FYI - I used the same approach when designing the Heath SB103 transceiver chassis back in the early 1970's.? With vertical solid metal separators, we were able to achieve some impressive isolation

I found my best/believable price at ITEAD.CC 73 Bill WA8VIH/4

Michael Unfortunately, I do not yet officially support 3.2. I only support 2.4 and 2.8. Soon the GUI firmware will have been changed by other users. I have converted 2.8 "for users with 3.2 and 3.5

Hi Ian, I've go a 3.2 Nextion with your name on it lol. Was told about the Beta. -- Michael Shreeve N6GRG

Several have explored modules for BiTX/uBiTx.? Paul M0XPD is one:?http://m0xpd.blogspot.com/2014/08/plug-in-bitx-modules.html? ON6RF developed a very nice PCB with all the modules able to be

Cool. I was able to connect the headphone output of my USB sound adaptor direct to the microphone input and volume control gnd to high side direct to the USB sound adaptor microphone input. I'm only

Nick, Here is the data sheet. It is attached. Marco - KG5PRT

Oops, not sure what happened there... I was just looking at the spec sheets of the BFR106 vs MMBTH10, They look very similar in our application of the uBitx. (hFE, current...) I ask as I have a stock

the TDA2822M is removed in the version 4 of the ubitx. and the audio on speaker sucks.

On Tue, Jun 19, 2018 at 01:34 pm, Jerry Gaffke wrote: > > BFR106

Gary Thank you for your interest. I'm writing a post to make it public. you can download it soon. 30 seconds is too short. Please click in an hour :) Thank you again for your interest. Ian

Here's mine for another reference.? I did not record the frequencies but they were all tested tx'ing FT8 so you could look them up if needed.? 12v input. ?watts 80m 9.36 40m 8.12 30m 4.67 20m 4.16

Just realized i forgot to attach

I found this image of power out on different bands from Tim (WB7UVH) and wondering is this about average on power out that everyone is seeing. I’m trying to whip up a adhoc power meter using an

Nevermind, I found the spreadsheet.. THANKS!

Hi Kees, Just wondering if you can confirm my DX order for AGC 2 boards is ok? 73 NIck VK4PLN