开云体育

Here’s 20 meter FT8 tonight in Plano TX. Don’t think the band is dead. Mike K5ESS Sent: Saturday, June 2, 2018 8:44 PM To: [email protected] Subject: Re: [BITX20] Transmitter Mods I guessed that

I see a lot of post about the Nextion display. What advantages does the if have over the mcufriend displays? Jack, W8TEE

I only wired this 10 wrong ways until I figured it out. Sunil said he was working on a book of instructions to go with his cases. Al KB4RA

Jon, Your manual is well written and easy to follow. If setting the calibration and the bfo interact, you may need to add a note in the manual that repeating the setup again may be needed because of

I worked out the wiring for the usb. Had a mini usb that I cut about 12 inches and wired to the usb back socket. I did that so I could use FT8 and other digital modes. I have a picture Buddy that I

I guessed that installing the mod would not affect only 1 band but I thought maybe I bumped something else.? As you suggested I'll wait a few days to see if the band wakes up. -- Lee - N9LO?"I Void

First let me thank all who responded to last post, your ideas were a great help putting my uBITX together. I now am at the point where I have no idea how to proceed. I am using a case from Sunils and

Have you thought about lowering the audio signal you have feeding the ubitx? I know I can vary the output power a lot with my two-tone generator by just cranking the amplitude pot on the generator up

A couple of 5amp or 10amp Silicon diodes (5 watt rating) will give you a voltage drop of about 1.2v or 12.6v feeding the board. I had to crank up my power supply to 15.1v to get a consistent 12v out

Yes its a significant issue.? ?When tuning the 28 to 29 mhz range the spur falls in the upper aeromobile and HF marine band.?? Allison

Essentially the same The 2n2222a has a few minor spec notes but they are the same so long as its the TO18 metal part.? Do not expect miracles.? there are a lot of other changes that go with that.

Nicely done!!? WA9DOH mikehagans@...> wrote:

Hello everyone i want to ask about the s meter i do it like the diagram Which is includes lm368 when i i programming by ubuub manager i i g the max value same the minimum value i try alot and nothing

Hi all, ? The BitX is sold. ?Thanks. 73 Phil W1PJE

Its better to take care of this before it gets to the RF amplification section of the uBITx… Sent: Saturday, June 2, 2018 4:35 AM To: [email protected] Subject: Re: [BITX20] RF power chain mods and

Probably 20 was dying when you were listening. See what happens over time. There is nothing in the mod that can affect audio levels.

I will take it... send me PayPal info..

I installed the inductor and capacitors, thanks Howard.? My output changed across the bands.? A funny thing happened.?? The receive audio on 20 meters dropped way off.?? 40 meters is nice and

SWEET!!!!

Here's a couple pics of my just finished Ubitx project...I call it my Drake TR8 QRP built in a Drake MS7 speaker cabinet...Mike W4ZGI