开云体育

You said: "It is apparent that you do not feel this is an honest mistake because you have given yourself the boot in the pants to leave," But he said: "I submitted this site for info and help for hams

Like what? Terry - KB8AMZ

Allison, How about using KST10s for Q10/20? Same as the MPSH10, but surface mount. Just a suggestion. Marco - KG5PRT

Just a wild guess.... There is enough pickup die to leads to hear the station at the input of the 45mhz mixer and? its second harmonic 90mhz plus DBMs make very good phase detectors (that means they

Hi need help with the wiring of a bitx40 got to the part where you do the 8 pin on the raddduino board but then it said ti hook up the 5 pin connector?to the board don't bknow if I got the wrong?

Terry, you read things in his post that I certainly didn't. Vince.

Thanks for your response Jerry, but I am still snowballed. Like I took the Extra Class License class the second time around with the same instructor, Jim Wilson, AC8NT. Jim is a scholarly guy with

Thank you Kees.? Envelope arrived in Vermont this afternoon safe and sound. 73 de Vince N1VIN

David Todd, You are way overboard on your decision to leave the group. If that is your decision, then by all means leave. No one in this group told you to leave or asked you to leave. You decided,

Jerry, The problem is the input impedance is the aggregate of the Miller and fixed (gate capacitance). That means two things, it changes with voltage and power out (voltage swing at the drain) and

Sorry, I forgot you probably had yet to tune the IF section. It did not dawn on me that might be the issue. I have not scratch built SSB radios with IF sections but I did build one AM receiver which

Agree with Allison. If what you want is a FM monitor receiver, then design and build something specifically for that purpose. If you want an AM General Coverage receiver, then build one specifically

Alison ! Your reference to TDA7000 got me thinking how about a filter and ZN414 clone MK484 available from China. Appears nice simple a typical uBitx like solution. I still have some marine radios

Farhan, Look the traces for the final to the output transformer.? Make them wide (low impedance). same for the gate.? The interaction between the mosfets and the drivers is both closeness the three

Superregen at 45mhz as AM/FM detector... I can't go there.? ;)? I did it 40 years ago at 10.7mhz I learned a lot.? I wanted a RX that could hear Aircraft (118 to 136mhz) and 2M fm (144-148). Its a

Thanks so much for the quick and concise reply.? This means I'm almost done!? All I need to do is add a fuse. 73s from Dave in Missouri! KD0UYH

We can probably use the AGC for SSB as welll. - f lkorahul@...> wrote:

Alison, My main interest was in demodulation. With its full HF coverage lack of proper AM detector seems a major feature lacking in the rig. NBFM comes as bonus with this chip. TDA1220 has an

You should have a red wire that is not connected on the audio connector. There is a purple wire on the other connector will be a purple wire that is not connected. When wiring up the power connector,

I've found that when the new directory is created, if there are multiple files you need to move them there.