开云体育

...I suggest an application, running on both linux and Windows, that is a configuration menu.? Check what you want and the app tells you if it fits.? The app generates and compiles the configured

The diagram was a whole lot better than what i did on my phone though! Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton,

Gentlemen and ladies too, As one member of a software/hardware development team (W0EB/W2CTX/N5IB), I've hesitated to join in this discussion for fear of being thought as "dissing or denigrating" Ian

I put the switch in the main line because relays can and do stick closed. There is disagreement about whether the fuse or the switch should be closest to the battery. Feel free to wire it according to

I believe there are “ElseIF”s for #define variables too so this is quite powerful. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch –

I have seen this approach used on the Ten Tec REBEL and PATRIOT and in my opinion was a disaster for people who do not know what we are talking about! Taking this approach I suggest an application,

Hi Tom (or anyone else that knows :), Curious where you sourced the diodes, an Ebay search only showed Asian sources, are there reliable ones there, or known good ones in the US? Thanks, very. Scott

One could try 2n7000, source grounded and the drain connected to a 470pf which is in turn connected as a tuning cap of the filter. Changing gaye voltage will change the effective reactance of the

Minor details. Always minor details. Grin. Regards. Max K 4 O D S. I've Never Lost the Wonder. Antique Electronics Site: <http://www.angelfire.com/electronic/funwithtubes/>

I agree with K9ZC. ?The easiest way to free up code space in the Nano is to use conditional compilation for "optional" features that not everyone wants. This is the approach taken with the K3NG/ NANO

I'll draw something up, take a picture and post it as soon as I get a chance. I have some other changes, simple ones, that also are worth the effort and I should post them also.

Just uploaded the latest list of those interested in an AGC and Click Mini-kit as described earlier (in the "Files" section under my call). Since there does not seem to be a demand for the boards

Yes. Spend? a little time at the ubitx.net site. Jack, W8TEE

I think it could be done without too much confusion by using preprocessor directives. That way, you don't actually mess with the code; you only change the symbolic constants you wish to affect. For

I have already built your BITX40 which I am using with great satisfaction. I have just received your "Micro BITX40". I ask you if I can feed the two IRF510s separately with a higher voltage to get a

Hi Allison The?KSP10BU looks like a twin of the MPSH10.? It is available from DigiKey for $0.19, quantity of 1.

This is where problems will begin to occur. Are you going to add in functionality to modify ubitx_menu.ino on the fly? Or are you going to break up ubitx_menu.ino into a lot of little pieces that can

We need a bit more information in order to help troubleshoot your uBITX. 1) Which opto-coupler on the schematic drawing are you referring to as being inoperative? Is it the manufacturer provided

Me-O-My-O I/O board. Jack, W8TEE

Anyone?