开云体育

We need more information, what radio and what firmware are you using? Also you needed to start a new subject line for your question and not use an unrelated topic line it keeps down the confusion.

How to store bfo and vfo frequency on ver 2.. help plse......

My basic mic

Hi Tim I appreciate the links that you have directed at me. Dave k0mbt

lovely design Regards MVS Sarma

Max, From board to board there will always be some variation of gain. You can increasing the mic gain by reducing the resistor BITX40 - R123 uBITX - R63 You could try the mic gain control I

[image1.jpeg] Three pieces of wood, and cheap momentary contact push button.

You're welcome. Please let me know the result. 73 Allard PE1NWL

Max, please check whether the mic body is connected to chasis ground. i mean the positive bias voltage for mic should come on independent pin and NOT to the body pin of the eletret element. In case

perfect thanks Sergio

Here is my minimalist microphone. Surprisingly, the PTT button works through the heat shrink tubing. So, I did not cut an opening to expose it - the button is "weatherproofed".

Uploaded a new version at this

Yes, if you redesigned the PA of the uBITx to match the design criterion of the WA2EBY amp, you might get his results… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

Hi Gents and YLs Just checking if anyone has a dead uBitx they want to part with? I have a spare case and enjoy the process of troubleshooting and repairing... 73 Nick, VK4PLN

Yes Ken it was a tongue in cheek comment. Although it is a good box for the uBITX and true there is a lot of room to add accessories inside. That handle is convenient for a grab and go rig too. I’m

The way Ian packages his IDC code is a bit problematic because when you unpack it… it over-writes his old code in the Arduino IDC. Simply including the VERSION NUMBER in the file name/ directory

AND it works every time now!?? Thanks Rod.? I can proceed with further commentary, hi hi. Ron W7HD -- Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 Lin

Rod, Thanks so much for the manuals! Paul K0ZYV

Hi All, Ron, W7HD, points out that downloading the KD8CEC 1.072 can be a problem because version 1.072 does not appear in the list. It is necessary to click on the Branch button, then use your

Thanks for all the ideas and interesting comments. I think you are right Tim, the tuner is acting as a filter. I don’t think I had the problem with a previous antenna - a standard 40m dipole fed