开云体育

Fahran, That is ok, but can you answer my question? "I placed an order few days ago... Does that mean that I will have normal chip that doesn't need any mods? Maybe just lowering voltage with 78L09?"

I am KM4TLR. That may be the second station you were trying to identify.

only just heard WA4THR and xxxDLR???? very weak sigs so far.

Just had a QSO with WA4THR. Signal was 5/5 at one point but faded completely out in a matter of seconds.

Yeah Hearing some bits of bitx voices. on 72769khz Heard band shifted louder then it stopped. Listening. KE0PVO

Yes, the passband of the 12mhz filter can vary by rig. The fix is using a PBT function within the configuration menu to get the best audio on an LSB signal. Could be that the 45mhz passband varies

I'm on 7277. Very quiet. Anyone else out there? -- John - WA2FZW

Also, seems like Ashar, some time back, not sure he was talking about BITX40 or uBITX had said that the crystals used for these passbands were not always using quite the same frequency due to the fact

For $4 I’ll take a kit. K2CPU wrote:

So we have two knobs to twiddle during receive: ? ? RIT:? Change the tuning on receive only. ? ? PBT:? Change the tuning and the BFO, both in sync This post suggests that "Clarify" is just

Well said ...chris

I've been playing with Ashar's AGC circuit on my BitX40, and it seems to work pretty well if I add additional capacitance across C113 ( I added 4.7uf in parallel because that's what I had on hand) to

Whoops, that did not get stated in post 44182.? My apologies.? (Was in the earlier draft mentioned in post 44228) Has been discussed in the forum here several times, though that was a few thousand

Hi Tim, yes, PBT and "clarifier" are indeed two different things. When I implemented this functionality in the Raduino v2 sketch for BitX40, I initially called it "clarifier", however later I realised

Here is a solution that I used.. QRP- labs.com /enclosures front panel . There are unmarked panels that the display fits in,with four holes around the display that the jacks fit into nicely . I'm not

Guys & Gals, I didn't want to leave anyone out. I just thought I should remind everyone that this is a forum for the BitX (all BitX's). It is made up with thousands of radio amateurs who want to

Michael, would you provide a link to your kits? Thanks, Roy WA0YMH

Here is the STL file for my Bezel.? As most know, 3D printing is hit and miss. My kit includes the Bezel, Metric Flat head screws, sheet metal screws, ABS standoff, and ABS 1/8" spacers for using

Question here, what basically would it take to make these into a 9600baud or better digital transceiver?

Have been reports here of clone chips that inexplicably blow if fed more than 7vdc. Appears to be several clone brands that sell parts made from factory floor sweepings, other projects have been