开云体育

160 has some kind of contest going on as well as a number of QSOs. 75 is quite busy. Should be able to find traffic on either of those bands. Vince. -- Michigan VHF Corp.

Forgot another important detail: powered by battery measuring 12.6V under load.

Finally got mine on the bench. Just wired up audio pot, encoder with button, tip & sleeve of 1 heaphone jack, power, and Antenna.? Used my N2CQR-designed 160m-capable HPF with the original ceramic

What Vince is proposing is that the stereo jack be wired with the TDA2822 output going to the tip, ground going to the ring, and the sleeve floating (not grounded). A speaker with a mono plug will

On Fri, Mar 2, 2018 at 06:51 pm, Walter wrote: > > On Fri, Mar 2, 2018 at 03:50 pm, Clark Martin wrote: > >> You could use the second audio amp in U1. ?The TDA2822 is a dual >> amplifier. ?What

While trying to compile the original Farhan BitX40 sketch, I keep getting this error message- *stray ‘\302’ in program?* ive been able to compile many other sketches but can’t seem to get this

I'm with you. The standard for audio outputs on a communications rig doesn't include stereo headphones. That said, the inclusion of an isolating capacitor on the output just makes good sense.? Sent

The bitx40 kit should have come with a ready wound toroid. The coil is 9uH as I remember. Raj

I didn't, nor would I ever tell someone to do that. It's been pointed out in the past that there are errors in the wiring diagram. If it says that, I'd call that an error. I haven't looked at the

If you only get black squares it sounds like the contrast is off. Do you have a potentiometer on the back side of the Radiuno you can adjust for contrast? tim ab0wr "Justin Maynard KN4FAW"

Respectfully - If you wire the positive output of the 2822 to both the tip and ring terminal on the TRS jack and the ground lead to the sleeve terminal and then plug in a mono plug you *will* short

I finished a BitX20 Ver3 some weeks ago and opted to go the analogue VFO route.?After a decent warmup it sits rock stable during a QSO and I've listened in to 20 min ragchews without having to touch

On Fri, Mar 2, 2018 at 03:50 pm, Clark Martin wrote: > > You could use the second audio amp in U1. ?The TDA2822 is a dual > amplifier. ?What you’d need to do is this: > ? > Remove R75 > Connect

I set up a signal link.? I like signal links.? they are easy to work with.? I also rigged up a cooling fan on a thermo switch to cool the finals. -- 73, W9KJO Walter

A really good non-drifting VFO means lots of work! Mica Caps and Inductors that don't change. It is just not worth it?? You get to decide. Just FIX the Raduino, and you will be much happier and

Justin: There is something to be said for fixing the radiuno. The resulting signal is much more stable than an "ordinary" analog VFO. That being said, there is nothing wrong with using an analog

Hi Justin, a group of friends and I have come up with a much improved board we call the "RadI2Cino", pronounced "Rad ee too SEE no".? We had a few for sale earlier to test the waters and the few we

Thanks for all the suggestions and info, guys. This is getting complicated quickly! Thanks, Roy WA0YMH

Purchased 30 Dec of 2017 std shipping Received no email from PayPal account or Hfsignals email (yet??)?? But But But WOW Woweeeee DHL Express Mar 2 2018 17:00PST to RememberTubes ? N7PB

They fit snug on the bitx40 shafts with my printer settings. If it comes out too tight reduce the filament, or too loose then increase the filament feed rate.