开云体育

Doc, My xyl vu2pin would spend 4-6 hours yakking with her sisters on a mobile because its very cheap here and currently free is you buy a data packl! Guess what she got a lesion on her auditory nerve

Thank you Jack, the problem is that it shows all the same name because it takes the project name uBitx20. Every project I downloaded has a new folder name but inside Arduino it shows uBitx20. That is

Here are some pics of my Bitx40. I used a Harbor Freight ammo can. I will be putting a small battery inside. I havent decided on what I'll use for a mic. This one works fine, but only

He did say "no antenna connected" though that is not quite the same as saying "nothing connected to the Bitx40 antenna port". Perhaps he still had coax from Bitx40 into the tuner. Then a fault in the

I think I am with Chris on this. Early on, I fired up an Icom 735 a couple of feet away from the Bitx40 and it did indeed take out Q13 but left nary a mark. Pat

Put a socket in. That way you only need to fix the board once.. lm386 chips are cheap.

Looks like C131 has also flashed. There is a dark area as if has burned.

My guess is he made a mistake and the 725 was wired to the bitx via coax and atu the poor bitx got a big dose of rf it can be fixed [email protected]> wrote:

When bored with all the cat videos, take a look at this: ? ??https://www.youtube.com/watch?v=urglg3WimHA Weird Al rules! Jerry, KE7ER

Very curious.? Blowing R131 and R132 might be due to a very large signal showing up at Q13, though I would expect Q13 to blow first. In your first post it says: I would think the Bitx40 would have

Hi Jack, I hope your response was in jest! I once gave a four session training package on financial planning to the docs at my institution and I told them the last session would be way off the beaten

Fashion a hat with any leftover scraps.Uncalled for... Jack, W8TEE To: [email protected] Sent: Monday, February 12, 2018 10:22 AM Subject: Re: [BITX20] Blown by nearby transceiver #bitx40help

Those with plastic cases for their Bitx40/uBitx?and with nearby high power gear might line the inside of that case with tinfoil.? Fashion a hat with any leftover scraps. Jerry, KE7ER

Thanks to everyone for your help, I'll be checking those and trying to replace the burned components. ?Jerry Gaffke ?(KE7ER), yes, we were testing 40m on a ICom IC-725.? I've found another two

Steve I should get mine today I noticed that it's in Minneapolis now. Do you know if the package has to be signed for ? Art

The Files --> Open Recent menu choice holds the 10 most-recently opened projects. I find that very handy. Jack, W8TEE To: [email protected] Sent: Monday, February 12, 2018 12:32 AM Subject: Re:

The actual resistance will also depend on the input resistance of the final amplifier. For instance, if the volume pot is set to maximum you would have the 10K pot in parallel with the input

Art, Just got off the phone with a DHL rep who said DHL will deliver here, not USPS. Your mileage may vary. The package is on the move again this morning! :-) 73, Steve

Ran : ?does rx mean receive, if it does? The radio has been ?reviveing the last four weeks ?very good hearing ?stations all over the world. ?73’s de AC8XZ

6" x 6" is what it needs (for a very very tight fit). At least 2-1/2" inches if you are on standoffs. The stand-offs are 1/2 inch, the display is another 1-3/4 inch above the PCB.