开云体育

Cesar EA3IAV You may have blown your Arduino NANO, or maybe not. In the later picture the red POWER indicator LED is ON, indicating that your NANO is receiving power, but that does not really tell

Would like one too....built if possible...still rough with smd. Steve/NOAA lol

Hi Ian, OK, thank you for the clarification. I suspected that was the case. :o) Mike, Yes when I do add the Chip resistors I'll take a picture and post it. Dave WI6R

If you are comfortable with using the Arduino IDE, why not load the ASCII table program (i.e., Examples\04. Coomunication\AsciiTable) and see if it runs. You can view the Serial monitor by clicking on

César EA3IAV Your "universal tester" unit is telling you quite a bit about your MOSFETs. As others have said, "if it identifies the device as a MOSFET the device is testing as GOOD". Because this

Someone else here might of did the same thing and bricked the raduino the same way. You may have toasted it. Sent from my iPhone

What’s up with the driver on U3. A leg looks burnt. Sent from my iPhone

Very impressive!! Jack, W8TEE To: BITX20@groups.io Sent: Sunday, January 28, 2018 11:14 AM Subject: Re: [BITX20] PiZeroW Controlling a uBitx

Good gosh. You’re not having any luck over there are you. Slow it down and take your time. Mistakes happen when you rush Joe KD2NFC Sent from my iPhone

Count me in for one as well! -- David K4DBZ Unofficial bitx chatroom:?https://discord.gg/CrHvWFc

You should probably email them directly. Don’t think you’re gonna get an answer here in the group. Sent from my iPhone

I ordered mine December 18th and still no word

Have you seen this?? https://www.raspberrypi.org/blog/accelerating-fourier-transforms-using-the-gpu/

Mine was ordered Dec 15th. Also got shipping notice yesterday, but going India post to Florida, so probably 3 weeks. Andy KM4TRT

Another consideration since you mentioned the W variant, RF from the radio will knock out the wifi on the pi.? I am running WSPR (tx only) on a PiZeroW with the shield from

Anyone thought about using a PiZeroW (or even a regular RPi) for controlling a uBitx? Yes. The problem we're running into is that there is nowhere the depth of support libraries for the graphics

It look like my nano is dead. i swapee lcd and it seems ok on that I have ordered another one. I see several ino files. Each one seems to do Something specific? do the have to all have to be flashed

One of those little Hall-effect surface mounts would be perfect for this application… The SGC mobile amp does this as I recall (maybe not… getting old!)! Dr. William J. Schmidt - K9HZ

It won’t show up as a fet if its blown! Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois

If they all showed as being a mosfet, they are working. It would show something else, otherwise. What is the gate voltage, when transmitting? It should be between 2 & 4 vdc. I doubt anyone is making