开云体育

Now settle down or I'm sending you to your rooom without dinner! John wasn't the one with the 0.92 displays. Check your own post! Vince. -- Michigan VHF Corp. http://www.nobucks.net/

Hi Mike I have not gone through the website, just checked out the home page. But to thank you for doing this. Ken VA3ABN

I note that there were almost 3,000 messages on this email list in December and we are currently at 2364 messages in January (and we are not quite to the end of the month!).? If you are not following

"I have 5 of the small 0.92 inchdisplays but have not been able to get any of them to work.? These are TWI or I2C interface and my Arduino does not recognize any." Before you get mouthy, check the

I have a particularly torturous route with no problems. See my reply in /g/BITX20/message/40383

If they don't replace them, start a claim with ebay

The connection to my LCD is a real hack job: two 90 degree headers and a cable with a 180 degree twist and it works fine. ??? Bob??? KD8CGH

They're not I2C displays; they're the 3.5: TFTs for the analyzed. ? -- John - WA2FZW

Same for me, ordered 15/12, notified of shipping today.

Did that! But thanks for the reminder! Waiting for a response. ? -- John - WA2FZW

Email this morning to say that mine has been shipped India post. Ordered 15th December, they're slowly getting through them. Looking forward to getting it! Alex

I ordered mine on 15th December. Received an email today saying it has been shipped.

Ceasar It might be worthwhile to make up a little test jig for evaluating IRF510 devices. Maybe just a pot to vary the gate bias and a 1K resistor in the drain lead. Ground the source lead. Monitor

The coupon is in the "Final Attempt" flyer for Feb and March. I've yet to see an electronic version of the flyer. It's possible it'll show up after the first of the month on the HF site. I'll post

Do you have the correct I2C address for the displays? You might check that. See: MultiSpeed I2C Scanner - 50,100,200,400 KHz. | | | MultiSpeed I2C Scanner - 50,100,200,400 KHz. MultiSpeed I2C

Have done business with same person....the way they are packed and handled by China mail, it is a miracle that anything makes it thru to the US....Mine made it okay......so far!!! Knock on lotsa

John My experience with high density displays is not any better. I have 5 of the small 0.92 inch displays but have not been able to get any of them to work. These are TWI or I2C interface and my

It is quite possible that the vendor is selling slightly defective culls from the production line.? Reputable manufacturers clearly mark such items to prevent them from being sold as fully working

Last tracking information for mine was ? 2017-12-19 00:19?Germany, FRANKFURT/FLUGHAFEN, Receive item at office of exchange (Inb), Air“ On 29th I got a letter from local customs office (Zollamt)

Contact the seller and have them replaced. Ken VA3ABN