开云体育

Is there any plan to offer the uBitX, less the Raduino? Or maybe just the bare uBitX PC board?

Ian, Jim and Ron, Ian, I see you have are also looking at Jim's and Ron's work on the revised Keyer and Tuning Steps. These should definitely be merged at some point along with your other

For reverse polarity protection, I use a diode and a small relay. the same type as used in the LPF. My uBitx has a battery pack included and the same relay switches over from battery to external power

Ian, Thanks for the update. I was running at 26 WPM, but didn't change the speed as that didn't make any difference before adding the CW Keyer circuit. Although tough to get through an exchange on

The uBitx A7 was left for S-Meter and Power meter inputs. That is why the original sketch uses one input to sense 3 different states - straight key, Dit and Dah. Raj

Great work!!! I have heard from Ron via email. applaud your efforts. I learned a lot from your code. When the new uBITX arrives(I ordered another one in December for a hardware modified version), I

Dave Thank you for your important information. I think about setting a range of values. I wanted to make this firmware available to users who have not modified the hardware. If set the range of the

All: The first thing I did was move Jim and Ron's Readme.txt file into the very top of ubitx.h header file as part of the comment. It's important to know who's shoulders you're standing on and not

That chip is on Bitx40, uBitx has TDA2822. 8 Ohms seems suitable for max output. Raj

So I have a relay that is controlled by the on-off switch to turn on power to the radio. It has the diode in series with the switch that goes to the coil of the relay and takes 60 ma. If the power

I also have one of those cases. They apparently have 9 different standard sizes but no listing on their web site of the sizes. You have to call. BTW - These are the same folks that made the videos

Ian, The CW is almost perfect but occasionally (too often to use for a QSO) it still sends a dash instead of dot. It is random - very random. An “I” sent produces “N” or an “S” produces

I figured it was time to invite all the new group members to plant a flag on?bitxmap.com?( http://bitxmap.com ) and remind everyone else the map is still alive and kicking. As of my last check we

I'm giving up. Called and called and nothing. Worked KG0BK, AA5TN for a while on 7278 which is turning out to be a better frequency. Ed W0OIC

I really FU.

Walt Ups tracking number is on this message. Someone could change delivery options and have it delivered somewhere else....just sayin' The tracking shows as 1ZV263450327176415 Sent by me

Dunno what I woulda done without that info. Thanks for passing that along! Vince.

---------- Forwarded message ---------- From: Amazon.com <shipment-tracking@...> Date: Sun, Jan 21, 2018 at 7:08 PM Subject: Your Amazon.com order of 4x "Kimberly-Clark Procedure..."

Thanks. Keep an eye out, we are busy on more neat stuff if it works. Jim

Mostly just noise here.? Every now and then I could almost make out someone but not enough to even guess.? I was really looking forward to breaking in my new call sign.? Maybe next