开云体育

Thanks. It was a concerted joint effort and we had fun and more than a few playful arguments in the process. Haven't met Ron in person, so I don't know how much hair he has left but mine has

Well I have been calling for about an hour nothing heard. I will go QRT and listen for now. -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com )

There are two power supply pins going into the uBitx and BItx40. Put your 1A diode plus a 0.5A fuse in series on the wire that powers the main board and the Raduino. The main board and Raduino should

Very nice! Compiled and uploaded with no problems. A straight key works well. I had already simply modded KD8CEC's code by removing the intermediate paddle value lines in getPaddle to get clean

Dave That does sound interesting.

Jim Sheldon and Ron--- THANKS!! I grabbed that code for later perusal!!!!! Thanks! gordon ________________________________________ Sent: Sunday, January 21, 2018 7:11 PM To:

We've been using it for the Sunday night QSO parties for as long as I've been in the BitX community. I know a lot of the guys monitor the frequency when they are hanging out in the shack. ? -- John -

Steve, that diode will only pass 1 amp of current. It will not work correctly if installed in series. You would need something that will pass 3 or more amps to work correctly. Don't forget to take

Hi gang.? I'm planning to install the diode in series with the V+ and then a fuse.? I only have a 1N5819 in hand.? I searched the data sheets for this compared to the 1N4002(7), and, even though I

One other thing I forgot to mention above - the need for squeeky clean key contacts or electronic conditioning of the inputs by using FET's has been made obsolete with this keyer version.? Since we

Is 7277 becoming a 'BITX frequency'? If so, I'll hang out there. I don't have one "YET"...... Dave -

Copping N4DR here in Western Kentucky. My BITX40 is receive only. Need to get it finished to transmit. Denis, WB8SKP

Hi gang, Ron, W2CTX and I (W0EB) have been steadily working on fixing some of the CW problems with the uBITX software and also changing the tuning over from the accelerated tuning for band change,

not a peep up here anyone anything anywhere!? listening 277 and 278

Me too! Hear someone very faintly right at the noise level. -- John - WA2FZW

calling CQ 7.277 W1LY

Here in mid-west look for us on 7178 and 7278. South of the border stations on 7177 and strong carrier on 7277.

Broken mini USB port on the left. Salvaged, prosthetic mini USB port on the right. Will post results... Bernie, KC9SGV Sent from my iPhone

As promised, J68HZ Listening 7.277 for BITX/40 transmitters Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch - K9ZC Staunton,

Well worked a few stations even a new General *KJ4TJZ ( http://www.qrz.com/db/KJ4TJZ ) /AG Larry in VA* Also got K9ABL David in KY I will try and get back on for the 7pm but might be a bit