开云体育

You can find those on eBay under DuPont Jumpers. They come in M-M, M-F, and F-F. Some have plastic guards that come off pretty easily. Jack, W8TEE To: [email protected] Sent: Thursday, January 11, 2018

I got this on amazon very cheep from China looks good wire ?1,59p UK price Copper foil in the UK ?1,99p from b&m

Would this be the one at Mouser? https://www.mouser.com/productdetail/alps/ec11e1834403?qs=sGAEpiMZZMsWp46O%252bq11WdqIrXX3Pwjvkfo3ZjYP0Io%3D And, what's the best source for weighted knobs for this?

Could you cover the wires with copper foil and ground the foil chris

Make sure you have the black wire on the antenna connected to ground and NOT the brown one.? Also make sure that the RF output plug is wired properly so that the black wire actually does go to the

Bill, Before you get too invested in small toroids consider that the tuner must deal with higher currents than an LPF. Saturation results from current, not power. 100 watts and high impedance ratios

Are the relays working? Try a different band

John, don'u feel that that short extension cable radiates pulse noise from the d4 to d7 and other 2 wires? sarma vu3zmv Regards MVS Sarma

I got this today from amazon 40wires with male / female connectors for the sum of ?1,59 free post from China chris

Glenn, That's interesting. If it works well as you've configured it, it could be helpful for many builders. Regards Alan

Do you have an Amazon link you can post? Tnx, -- John AE5X

great Idea for home brewers. Thanks Regards MVS Sarma

BITX QSO Afternoon/Evening, Sunday, January 14, 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere. There was much discussion last week about trying to have a daytime schedule as 40

And mine, just arrived Phil -G7BZD Sent from my iPhone

Mine arrived this morning with no updates on either India post or royal mail tracking sites! Ordered on 9th December - In the notorious "bag" at Mumbai airport on the 15th. So there is hope yet all

Check your antenna wiring, the voltage dropping on tx with audio indicates it is transmitting. Don't transmit anymore till you find the fault. Could be the output relay K3. Raj

Hi Sean, I'll be following this thread as I just finished my ubitx tonight. Receive works great but I have no power output. :-(? K1 clicks away, CW creates a sidetone, microphone sounds like its

DIY. Open, remove or cut spring, assembly, have fun. I did it in 10 psc. Easy, all working.

Hi Alan, this morning i changed the remote cabling to run all the Oscillators in RG174 coax cable. See PIc, i should shorten the inners a bit. Nothing really obvious has changed except some encoder

Glenn, Interesting to see that you have mounted the Raduino remotely from the main pcb. Having read a number of posts suggesting that isn't I good idea, I'm curious how it's working. I'm still waiting