开云体育

I intend to set mine up with an HT speaker mic connector and play with a few of those to see how they work Art K0KUK

More info on the mod. I added wires: ? from the volume wiper to the rotary center. ? from rotary position 1 to Audio connector (original wiper destination)? ? rotary 2 & 3 to AF filter in ? AF

I'm well familiar with the Heathkit? Twoer "Benton Harbor Lunchbox". I built one a in Junior High school shop many decades ago. It disappeared from my life over the years. This Sixer was not only

Nope, I used a flat file. However, it was held in the hand of a 74 year old. Actually, I like the side teeth as it makes it pretty easy to get square corners. Jack, W8TEE To: [email protected]

Has anyone tried a Yaesu (Vertex Standard) MH-31 microphone with the uBitX or BitX40? Work well? Smoke? Other? Thanks, Craig w9ctw

Rare? I have over 15 of them $ 5.00 at swat meet's many times FREE.

Doc, Looks like you used a 1/2 round file. For such windows a flat file without side teeth is best! Raj

Mods sound good, but to a "rare" Heathkit? Benton Harbor Lunchbox?? Karl

I have a bezel and knobs coming, but this is what it looks like so far: The cutout process varies according to the panel material. For plastic, first I draw and outline of the LCD and then I drill 4

Here is my uBitx after first mods. I added a Sotabeams CW audio fiilter. The old TR switch now controls the filter. Down is the original wide SSB, middle is the normal CW and top is narrow CW. The

Mark, This topic refers to uBitx. Both B40 and uB have similar issues as the audio preamp and mic amp are identical. Raj

Is this Mod for the Bitx-40 of the Micro-Bitx ? ?Starting to get a bit of a muddle reading posts now on here , Not knowing what version of BITX there for .. Mark ?'Gw0wvl' ... Sent from Yahoo Mail

UK http://www.hobbytronics.co.uk/lcd-bezel-16x2 Digikey https://www.digikey.com/products/en/optoelectronics/display-bezels-lenses/93 Lots of suppliers out there! Cheers -- Raj, vu2zap Bengaluru,

Don't all home brewers have a Dremel tool with an assortment of cutting blades and grinding bits to smooth out the rough edges. I couldn't live without them. I use mine for home repairs, car repairs

Doug KD9CYF wrote... My uBITXs should show up any day now! On my BITX40, I used a cutting wheel in a rotary tool, cutting the opening slightly undersize, and then used a file to even it up a bit and

After struggling and agonizing for several days I finally got my front panel laid out and fitted to the Excellway case. Did I say tight fit? The three jacks just did not want to fit below the display

Several years ago when I was building Classical Guitars, I purchased a package of 12 Wood Laminating strips from Woodcraft. They are 1/8 inch thick and 7/8 inch wide by 24 inches long. There are

Adjust the Contrast (pot on the back of the Raduino). Took me a while to figure this out. Its set default at max and that is the problem. Dave WI6R -- 73 Dave WI6R

I would guess that one of the upcoming new firmware versions with cat support would allow for cat ptt. That has always been my preferred option with other rigs (ie ?ft-817) The opportunity to play

I created and posted uBITX Manager program yesterday.? Originally it is a program I created and created for the firmware that is going to be released today. Maybe you like the original firmware or