开云体育

?Can you give a little more information? How far off? Exactly how did you measure? What did you do (give the details) when you tried "calibrating"?? Do you have accesss to an accurate existing

Jack you are right. I was thinking of this ubitx software center git. Ron To: [email protected] Sent: Sunday, January 7, 2018 10:20 PM Subject: Re: [BITX20] Tuning reversed issue Sounds like more work

Sounds like more work to me. There's nothing sacrosanct about the two analog pins. As far as changing sketches, whose sketches? If you write your own, it really doesn't matter. If you use someone

Even easier is using a small object (thumb tack, tiny drill bit, etc) to unhook the black and brown wires from the header and reverse their positions. Then you can change sketches without worry in the

Hi Bill, Great project. Very interested in this as a remote tuner.? One query - why are the last two 5.2uH and 10.6uH as opposed to continuing to double up? Not a criticism just seeking to

Need some advice on how to calibrate my ubitx. I have read the instructions. ?After several tries no success. Reloaded the firmware but freq is still off. Is there a better way to calibrate? Art-

Thanks for the information Jack I really appreciate your help....Dale jjpurdum@...> wrote:

So for all the folks that sent me emails about the cheap auto tuner kit... i made some progress this week. The cores came in and i would a staggered set that total 20 uh. All checked out and tested.

I watched the band go dead after it got dark here.

The cases you see are for the bitx40. They will have a ubitx case, shortly. It has not been released for sale, yet. It is supposed to be released sometime his month. Marco - KG5PRT

I’m considering ordering this great looking all band semi kit. I’ve built s number of kits of varying levels of difficulty. I noticed that there are some cases for sale on eBay but it’s unclear

After Ron helped me get over the "stupids" and I finally learned how to properly compile & upload stuff to the Raduino, I now have Ron's mods running and he's fixed a lot of little annoying things

Sorry Bob, I already sent him the money - I usually don't get that lucky, but I was in my email client when Fred's message hit and it was too good to pass up.? I do have one coming in the 2nd batch

I listened to both, nothing heard.? We are having a significant warm up here, going to be above freezing for a few days.? I will check the antenna tomorrow! Dave, KI4PSR

All - turns out my ammeter was reading 0.0A on a simple D-cell and lightbulb circuit. Sorry for the noise!

Thanks Dave...I'll play around with higher value dropping resistors and see how I fare. Paul ZS2OE

Is everyone QRV on 7.277 or 7.177? Never think to try 177. Still keeping the freq warm up here. temp up to +19 deg F outside - heat wave!

Al VE3RRD and Tom VE3THR are in QSO on 7.277 right now. Not hearing anyone anywhere YET! 00:58 HRS UTC.

Nothing here in Illinois either- maybe 3 or 4 hours earlier sometime? Band is awfully long here by 7p. 73 Scott ka9p Make something good happen!

The backlight resistors are not usually that high in value? Unhook all 12V power and run Raduino off of computer USB, adjust contrast pot to see if any thing shows. It always is almost full up, near