开云体育

Ground loops are a major pain in the *^{%. Connecting to computers only adds more parallel paths to make loops. I’m running into problems measuring current draw from my DC supply because Power is

Thanks to your two suggestions, I just ordered a couple myself. Thanks! -Mark

Hi All, If any of you have access to a laser cutter, or are really handy with a fret saw, you may find this useful. https://github.com/maxlock/ubitx_case -Cheers Max, G7UOZ.

And for a not TOO outlandish of a price you can get this one. https://www.ebay.com/itm/Spinner-Knob-with-Finger-Divot-2-1-8-Diameter-for-Antenna-Tuner/161718781729?ssPageName=STRK%3AMEBIDX%3AIT

Raj, Could you suggest a method for bypassing L1-L3? I'm not sure how I would do that with any temporary change, any approach I can think of would be permanent and then attempting to reverse the

Okay, a Drake knob is just as classy. The 2 inch skirt fits my cabinet perfectly. ?RL Drake MN-2700 Main Tuning Knob W/2" Skirt | eBay | | | | $ 9.99 | | | | | | | RL Drake MN-2700 Main Tuning Knob

?Ashhar, you are so far ahead of people like me that there is no comparison. I went and googled a T220 just to learn what you were talking about..... The business, design, and manufacturing skills

Whoops! I should have read the description more thoroughly. It's just the metal inlay. Doggonit!? Sent from Yahoo Mail. Get the app

Hi, noticed today while using Ashhar's CAT routines (FT-857 & similar emulation seems to work fine) -- that my transmitted winlink digital signals were.....lousy. When I added some clip on ferrites to

This is not extraordinarily accurate information here. By some unknown manner, while fiddling with the uBitx today and trying various digital modes.....I accidentally entered "factory alignment" and

Thanks for the heads up!? I'm really looking forward to everything I'm going to learn through this....:) Tom AB7WT

It may work IF you add enough filtering.? As it is, I imagine you'll get a LOT of AC hum mixed in with both your receive and transmit audio & I don't know what other effects you may encounter. Good

What's its diameter? Jack, W8TEE To: [email protected] Sent: Saturday, December 30, 2017 2:23 PM Subject: Re: [BITX20] ubitx example of enclosure Thanks Shawn, the project still needs a few touches

Thanks Shawn, the project still needs a few touches here and there and I think I'm going to cut up some double-sided PC board for the front and back. I found an eBay seller that has a Collins style

Hfsignals is an enterprise model that is radical. Instead of building more into hfsignala, i would encourage members to try something similar in their own countries and neighbourhoods. Ham radio is

The supplied pot wiring is shown on the wire it up photo. If you have gone with the 10 turn pot the center tab is no longer the wiper. See the 10 turn pot specs (if you are using one) on the

Thanks John and Dave. Mike K5ESS Sent: Saturday, December 30, 2017 6:50 AM To: [email protected] Subject: Re: [BITX20] Additional uBitx specs Check this

They (adafruit) have knobs that fit that pot and also a rather large knob designed for a rotary encoder - has the finger dent in the front. Vince.

I got 2 - 24x18" sheets from Dupont for free as samples. That was their standard sample size! On one of the FB electronic groups someone posted a link to where to get it. The Dupont rep was more than

Hi Thomas. I really like your use of material for the inside corners, on the front. And the extended front edges - look good! Thank you for sharing that photo. 73, Shawnr. kf7yff.