开云体育

Hfsignals is an enterprise model that is radical. Instead of building more into hfsignala, i would encourage members to try something similar in their own countries and neighbourhoods. Ham radio is

The supplied pot wiring is shown on the wire it up photo. If you have gone with the 10 turn pot the center tab is no longer the wiper. See the 10 turn pot specs (if you are using one) on the

Thanks John and Dave. Mike K5ESS Sent: Saturday, December 30, 2017 6:50 AM To: [email protected] Subject: Re: [BITX20] Additional uBitx specs Check this

They (adafruit) have knobs that fit that pot and also a rather large knob designed for a rotary encoder - has the finger dent in the front. Vince.

I got 2 - 24x18" sheets from Dupont for free as samples. That was their standard sample size! On one of the FB electronic groups someone posted a link to where to get it. The Dupont rep was more than

Hi Thomas. I really like your use of material for the inside corners, on the front. And the extended front edges - look good! Thank you for sharing that photo. 73, Shawnr. kf7yff.

I know that feeling. It usually takes me one or two tries to get things where I want them... Sent from Yahoo Mail. Get the app

Hello Ken. I checked out your web page. Saw the case makings of yours? for the Tut Hill on one of your project pages. Nice. I have two of these radios collected. One with the factory case - 80M. The

Ahh. New sw thats the resolution to my problem!!! Did manage te do something via cat with the original sw but got strange errors on uBitx. Cant wait

You almost certainly have your tuning pot wired up wrong. Wires into the pot include 5v, ground, and the wiper goes into a Raduino analog input pin. You likely have the wiper wired up to 5v. When the

You must be shorting a power line thru your Pot?? Pot draws lots of current, smokes, and PS current limits. Don't keep doing it.? BitX is too Young to Smoke! 73's Mike, WA6ISP -- Mike Hagen, WA6ISP

How many times does a BitX40 that you had a Sunday nite QSO with drop in on your bench? All of these will be on display in Morristown TN next week.

You can count me in. A 160M addition would encourage more operators to try this band which is also my favourite. While at it, would it be possible to include 630M? Although I am not sure that the

I have a suggestion when someone suggests a vendor.? The idea came to me when Vince found a 1/4" shaft audio pot (great find by the way). On Fri, Dec 29, 2017 at 03:39 pm, Vince Vielhaber wrote: Just

I just ordered one and intend to integrate it with my ?BITX. I'll post the results. Jack, W8TEE To: [email protected] Sent: Saturday, December 30, 2017 9:39 AM Subject: Re: [BITX20] Tuner? Well Sure!

But, like any doctor who performs circumcisions will tell you, it's easier to snip the extra off than put extra on! I'd much rather start out too long than too short!

I've already got the 4:1 balun made for an OFC dipole, AKA 'Windom.'? Just need some copper wire and a bit of hardware to finish it up. -- 73 de W5NNH

Ordered 21 December 2017.? GF gave me the money for it for Christmas.? (Gotta love a woman like that!) Would love to know when the back orders start shipping. -- 73 de W5NNH

Just finished building a Kits And Parts (kitsandparts.com) SWR bridge.? Says it's good for up to 100W intermittently.? Probably would accept the 10W from the uBitx w/o a problem.? Designed to

I've bought most of mine at hamfests. eBay is also a good source, and McMaster Carr sells 2' x 3' sheet of double sided 1/16" for $48. That's 7x more than you need for this project, but if you