开云体育

That all seems normal. On my Flex 6300 the 40M Noise Floor is currently -110 (night time it's quieter) - That's S6 in real numbers, and -85 is a strong signal. Dave WI6R arvopl@...>

I looking to hang (lightly) a buffer amp off just ahead of the Roofing Filter so then use something like an RTL with IQ outputs: Should operate in TX also as monitor? My plan is to build a Panadapter

Bottom line up front: I am having a problem with my Bitx40 where the power output decreases as I increase my frequency across the 40m band. I completed all of Allard's 1.27.3 mods, plus RX/TX lights,

There's a company out there called Seetron that sells them.? I've used a number of their products in my projects.? They are made of Lexan and are stick-on with a clear window over the display.?

I actually have the schematics for one that I was going to do as a motherboard, replacing the raduino with an arduino, allow for easy migration to a AD9850-DDS module(s), etc, but I haven't pursued it

I'm not looking really for the mounting hole distances, I'm looking for the relative positions of the headers from the mounting holes so that I can create a motherboard that plugs in and replaces the

Mr.?Farhan, Could you please design and sell thru-hole versions of the Bitx and uBitx as either blank PCBs or a partial kits with the toloroids pre built? This would allow people that prefer thru

I tried duplicating the sota40 tuner. With a 3.3K dummy load, it could only give a decent swr dip on 40. Very shallow on 20. Anybody else used this? - f

I have sent Bezel Kit to a lot of folks on the List. Maybe some will chime in and say what they think? They come with spacers (8) and screws. I will find the STL file and post it. Mike, WA6ISP -- Mike

I ordered stuff India post just one time. Took 6 weeks from the time it was shipped. I ordered my ubitx DLH supposedly one week

I can’t wait to try it out.. I found this mini usb ext. cable that can be mounted to make this all come together for a nice way to interface.

I ordered on the 15th (late to the party!) Just holding out and waiting for it to get here. When it arrives I'll be pleased :) it did say shipping after the 25/12 so I guess mid Jan time for India

I installed wsjtx and fldigi in raspberry pi3 to control uBITX. There was a minor problem, but it worked perfectly.A minor problem is that uBITX reboots when you press the init button (hamlib tab in

Does this do that? http://www.qrpkits.com/ezseries.html#eztrsw

If you guys can come up with something that works, it might provide a chance for Asher to provide employment for many many more people. Remember the most recent MFJ products measure impedance and use

Bill K9HZ It seems that anybody with a CNC milling machine might be able to precisely cut a suitable bezel. Those with 3D printers should also be capable of making one, or many. A bit more complex

I have been wondering about an internal tuner for my uBitx and/or my BITX40’s. This sounds great please count me in on one.. love to see enough inductance to work on 160m also maybe a mod a future

https://www.seetron.com/index.html

Thanks for the good info. I have not run amateur radio for several years. When I read github of Farhan and Allard, it is as you told me. i will consider releasing bug fixes and improvements through a

I am starting work on a rig control system for my uBITX and have a few questions...... Hamlib uses numbers to identify the rig that is being controlled, like this: * 133 Vertex Standard VX-1700 1.1