开云体育

?the filter can tell and doesn't care whether the spectrum going through it is upper or lower sideband..... What makes it upper or lower sideband is the relative relationships between the radio

Hey David, I figured this out last year when I could never resolve SSB in any superhet that I built. I got a copy of EMRFD and it all came together. Here is my attempt at explaining it. First, the

Hi Allard at A2 I measure 2V and can not find any short to ground. Next thing I will try to wire a resitor from A2 to +5V and see what happens - comming back. Thanks Gert

So, as I understand it, a SSB signal is where half of an AM signal and the carrier are suppressed. For illustrative purposes, I'll draw a full AM signal like ..::||::.., where || is the carrier and

?Getting it to do upper side band isn't that terribly difficult, a small mod or two in the raduino sketch will do it ---- but it is just as easy to upload one of Allards' sketches and then it handles

Btw, we are building it inside a Hello Kitty or Frozen lunchbox for her

Yes. She's 9. We just want a pushbutton to switch from LSB to USB and back again. So, that's what I'd like to figure out how to do. I've got a heatsink for the final and removed C91 and c92

That heatsink only 1cm thick but works OK I like to look after the pa I waiting on a kit from EA3GCY called ILER-17+ dds Going to put it on 15,12,10m its my new winter project chris

Maybe not enough coffee but at first I though you meant something like this... https://www.amazon.com/Plugable-Sharing-One-Button-Swapping-Computers/dp/B00JX3Q28Y And did I read that correctly?? Your

No but, If you want any of the features that Allards sketch provides then go for it. You could add some components to the BFO and have USB. Raj

Yep feel free I have built 3 sets all the same looking I had the dds programmed for me so no credit for them. Chris

?with THAT huge heat sink.....it is no wonder it never gets hot!!! ________________________________ Sent: Tuesday, November 28, 2017 9:36 AM To: [email protected] Subject: Re: [BITX20] First real try

Cool it worked I upgraded my heatsinks on my pa,s I have added photo the pa never gets hot

?VERY COOL!!!! Thanks for the schematic!!! (and the rig looks nice too) Now can I have permission to publish that on our ARES web site at qsl.net/nf4rc??? THANKS!! Gordon

This may be a stupid question. I'm just getting into the bitx40. Actually, I've only been a ham about 3 months. My daughter is 9 and wants the bitx40 fir talking and FT8. She's a tech, but taking her

OK let's see if this works Photo showing 8watts powered at 12v Photo showing 13watts powered at 13,5v In to 50ohm dummy load

OK I don't have PC I see if I can do it with my phone chris

Would you be able to scribble down a portion of the schematic, putting the original capacitors etc in black, and your changes for 60 meters in RED or some other color, and then take a photo with a

I need to correct one thing it should be 100pf on L7 not 470pf sorry chris

?thank you for that infomration!!!! ________________________________ Sent: Tuesday, November 28, 2017 8:32 AM To: [email protected] Subject: Re: [BITX20] First real try at 80 meters using QRPKITS 80M