开云体育

You might want to put that O'scope on the power supply. Vince. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/ http://www.metalworkingfun.com

My latest kit (third) Raduino was acting weird with the last two digits jumping around even with fixed resistors for the tuning pot. additionally, the display would jump into calibration mode all by

Far as I know, the code you pointed to: ?https://github.com/afarhan/bitx40 ( https://github.com/afarhan/bitx40 )?.? is what has been programmed into every Raduino that's shipped since the beginning

That's probably not the code you want. You'd be better off looking at Allard's code: ? ??https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 ) Many many more features and a few

I was having difficulty trying to build and upload the most recent code (sketch) found at?https://github.com/afarhan/bitx40 ( https://github.com/afarhan/bitx40 )?. ?Just wanted to pass along to

Is this the thread? /g/BITX20/topic/6054982#32689 ( /g/BITX20/topic/6054982#32689 )

I thought the screen was pretty ugly, but i thought that those colors were probably just some "default" theme or something. Thanks for the tip.? -Rob

There was also another thread (sorry, don't recall number) detailing the real fix: the "complement" operator (~) before each color 'int' value. It would seem some sketches had that operator removed.

Thanks Rob, That's exactly what I was missing. BTW, it looks like the colors on your display are inverted. Others have encountered the same problem, depending on the display. For example, see Jack's

Okay, I figured it out. I was close. The AD9850 only uses the MOSI because it is writing the frequency on the bus. The RTC uses the MISO because it is reading the clock information from the bus. On

Hi Loren - thanks for the information on the cap. I don't have one in and it seems to work fine. I'll keep an eye on it though. I have been looking at how to hook up the RTC and connect it to the SPI

BITX QSO Night, Sunday, November 5, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere Join us as we make contacts from BITX40 to BITX40 on 7.277 MHz in 40 meters! This is a worldwide event

Besides left and right they are available in up and down. I installed an "up" because it was shorter than a left or right and I had very little space between the 10 turn pot and the USB plug. It just

I have purchased this kit from EA3CGY, which is intended to mend this problem... have a look at it

I have purchased this kit from EA3CGY, which is intended to mend this problem... have a look at it ? http://ea3gcy.blogspot.com.es/2017/08/anti-plop.html?m=1 (

Hi Rob, C14 is a 100uF electrolytic cap.? Good luck and 73, Loren

"I am experiencing this annoying thing when I PTT. When I speak my voice can be heard through the rig speaker. It is only for 1sec maybe less. Anyone experiencing this??" It is a normal thing. The

With RV1 fully clockwise, the FET's current *will* be 0. With power off, practice turning RV1 anti-clock to get about 10 seconds end-to-end. Back to fully clockwise, power up and turn anti again as

...or rv1 is turned down too far...

I finally tested the in-line amps from the PA-PWR1, and assuming the wires/probes were making a connection, I got nothing when the ptt was pressed. I assume this means the IRF-510 is actually blown?