开云体育

But gained status as a hacker! Nice work. ?Any pics or details?

This connector is the same as the connector on Arduino

I bought the wrong one off Aliexpress as well. Fortunately I had a $20 voucher from eBay I used and bought the correct one for the voucher + $5 postage off eBay. Just waiting on the AD9850 type2 from

But you have certainly lost your status as a QRP'er. 8-( _._

I took the final and filter section from a non-working Kenwood TS-440 and I am driving it from my bitx for 200+ watts output. ?I get heard pretty well.

All info about the software and related buttons, modifications, etc. can be found at https://github.com/amunters/bitx40 But those buttons will only work if you install the related software, so you

I don't know any hams around here that I could ask or I would get someone to do a 60m one for me I know nothing about code for these is there info somewhere to connect all the extra buttons thanks

Ah I see... Isn't there a fellow ham in your neighbourhood with a PC who could install the latest software for you? It would allow you to extend the tuning range plus it will enable many other

I have a 10turn pot for tuning I still need the 2 buttons to cover the band I changed the wiring so I can jump up or down 100kc with out been at the end of the pot run I don't have a PC so my bitx

hi my way of generating cw is a completely separate cw transceiver. terry gm4dso

hi what is this kcunk. i have a unmodified bitx40 and i fail to hear a kchunk when i switch to tx. is it anything to do with the cw mod. i am on v 1.15 terry gm4dso

Not if you replace the stock 1-turn tuning pot by a 10-turn pot. Then you can tune over a wide range and you won't need the "anti-galopping" mod involving two extra buttons. 73 Allard PE1NWL

I would recommend three right off the bat. You'll need one for push-to-talk. I strongly recommend just doing the galloping VFO fix with +/- tune buttons right away. Tuning the BITX 40 can be tricky

I think function button? key/atu spot Optional on/off

I have my (first) BITX40 and the case (actually two for some unknown reason) arrived the other day. I have yet to hay-wire it together so I can play with it (hopefully today) but I'm trying to do some

I got my boards here: HF Linear AMP 40 watts as by Mike Kossor, WA2EBY Semi Kit | eBay Rich KC8MWG | | | | $24.00 | | | | | | | HF Linear AMP 40 watts as by Mike Kossor, WA2EBY Semi Kit

LOL! It may be a few months before it is completely finished, though HOPEFULLY before the end of the year. Some of the originally specified parts are obsolete (or require an order minimum of 200

When you're done, send me a pic. I'm going to caption it with "YOU MANIACS! YOU BLEW IT UP!" Seems apropos... (Planet of the Apes reference...) ihc73scout2@...> wrote:

I plan to incorporate a 150 watt boost converter into the amplifier to provide 28V (with additional filtering, if needed), so that I can get the full 40 watts output. I mainly want to use the amp for

* Thanks Mike, good weekend.73* * Jorge* 2017-07-01 11:43 GMT-03:00 Michael Hagen <motdog@...>: -- 73 de Jorge PY2PVT Campinas SP GG67MD