开云体育

For window 7 with 32 bit computer what are the steps to be followed. followed Soundar vu2rjw terryhugheskirkcudbright@...> wrote:

When you say BFO is on the skirt of the filter, do you mean CW will need to be turned up? And with clean CW we drive it really hard.--- How hard? Do you offer any words of advice about safely

I've been used to pronouncing 'Bittix'. Probably cause is that the seperate 'X' is pronnounced as ' ix ' in Dutch. What's in a name..?? 73, Alex PA1FOX

BITX Adrian

The audio oscillator approach generates regular CW as well. ?I was moaning a bit there about all those other potential sources of dirt in our CW transmissions, but if done correctly there's nothing

Allard's solution is regular CW. ?It should give a cleaner signal than the audio oscillators that are often used with the Bitx transceivers, since those will have signals with a residual carrier and

OK, Thanks. Standing by for your announcement. Bill, VK7MX

That will work. Jack, W8TEE To: [email protected] Sent: Wednesday, May 31, 2017 1:12 AM Subject: Re: [BITX20] #W8TEE TFT/VFO Boards Gone So, just to be absolutely clear, Jack, I emailed requesting 4

So, just to be absolutely clear, Jack, I emailed requesting 4 boards but had not received a response from you before you ran out of stock and as a result, I hadn't made any payment. Now, once you

Jack, I can use three of the TFT/VFO boards when available. Thanks for making them available. Dale Lam - N0OU

I was happy with a SSB Transceiver to go with my CW transceiver, but I can't help thinking I am missing a great opportunity to try digital very cheaply with the Bit-X 40. Especially since Allard has

That would have been the smart thing to do, but I did send out multiples on some orders and then realized I wasn't going to have enough boards. So if your order comes up short, you need to reorder

Thanks for that update, Jack. Are you maintaining a list of those who have ordered but are awaiting your advice as to the number you are able to supply before making their Paypal payment, or will we

All: I am out of my initial order of 100 boards.? A few of you have already paid me and you will receive those orders, but it will take about 2 weeks for me to get more boards produced and shipped

Reading Marcel`s report on PTT Noise Fix . I tried the relay fix but may be I got the wiring wrong Did Marcel? switch both + and - leads of the speaker to? ground or just the + lead? to speaker to

I used to pronounce it BYE-TEX. Then Farhan was?interviewed on W5KUB.com ( https://www.youtube.com/watch?v=2_BPq5E5MlA ) and he pronounced it BEE-EYE-TEE-EXS so that is how I pronounce it now. It was

All: I am out of my order of 100 boards. A few of you have already paid me and you will receive those orders, but it will take about 2 weeks for me to get more boards produced and shipped here. Also,

I like BIT- X as the pronunciation although I believe the name came from BI directional Transceiver (TX), so those who pronounce it BYE-TEX may have a valid point. -- Mike VK3XL

Hi Kevin: I have to pull out some of my test code for the CW, AGC, and speech compressor because we're trying to find a way to use less expensive chips. I'll announce when the code is ready, probably

It will be a different board. Jack, W8TEE To: [email protected] Sent: Tuesday, May 30, 2017 8:37 PM Subject: Re: [BITX20] W8TEE TFT/VFO Board from FDIM talk Jack Is the AGC, CW and compressor board