开云体育

To add the function button, look on this webpage ??https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 ) ( https://github.com/amunters/bitx40 )? ? where it says: "v1.07 ?

I like to add function button .please let me know how to add. Soundar VU2RJW

I honestly don't know what the cost is to meet FCC compliance, but I do know something about the cost of parts and cases. My concern is not what a company charges for a kit. I am a strong believer in

Thanks, Jerry. I have the cap that came with the kit on the pins as I'm supposed to. When I get the chance, I will another at the Raduino end and at the +5 and gnd on the pot. I did buy extra

Thanks, Allard. That makes sense. I really like what you've done with 1.11, I can't believe you're working on 1.13 already! I think my eeprom may reach it's write limit just from me upgrading your

$190 is a bit steep. But it includes the case and the digital readout. Also, this is the BITX20A and BITX17A. These kits include a major redesign of the original BITX, with a dual IRF510 PA and US

The one that was installed at the "factory". I just received the usb cord today.

I just upgraded to v1.10 with a 10 turn pot, a very nice improvement, this radio keeps getting better and better! How do I limit the range of the tuner from 7.0 to 7.3 MHz? I am using a 10 turn pot

On Mon, May 15, 2017 23:43, Brian D. K2BRZ wrote: 1.) The Tuning Range doesn't always stay where I set it. Brian, the tuning range value is actually stored in EEPROM and it doesn't change. But each

Seems steep only because hfsigs has spoiled us rotten. Was a very reasonable price a year or two ago. Jerry

$190 seems a tad steep. Jack, W8TEE To: [email protected] Sent: Monday, May 15, 2017 6:08 PM Subject: Re: [BITX20] SMD 20M BITX20 Pacific Antennas (QRP Kits) is still selling the kit version

I ordered a BITX40 on 5/9/17, it shipped on 5/11/17, and just received it today, 5/15. Paid via PayPal and took the DHL option. I was shocked, actually. Six days from order to receipt in Northern

This sounds suspiciously like the linear region oin the IRF510 is flaky. You may need to change the final transistor. But first, verify that your PA voltages are all good, stiff, and consistent. This

Mike: At present, there is no smd BITX20 kit available. As mentioned by Leonard, the Eliamady smd20 kit was available some time ago. It is actually a 3-mode multiband core unit, and can be adapted to

Move the wire from p3-1 over to p3-2 and change the sketch to point to A6 vice A7 and retry. v/r Fred W4JLE Sent: Monday, May 15, 2017 17:41 To: [email protected] Subject: Re: [BITX20] Raduino

Pacific Antennas (QRP Kits) is still selling the kit version of the bitx-20 complete with case. ANG

Just remove C91, C92, don't bridge anything. ?I would do it using two fine tipped soldering pencils, one on each end of the cap. ? Do you have 0.1uF caps at both ends of your that tuning pot

I updated to Raduino v1.11 and it is working pretty good. The birdies aren't gone but minimized fairly well. A couple of things I noticed, though: 1.) The Tuning Range doesn't always stay where I set

I tried both 10k lin and 20k 10-tur pot. No luck. I guess I burned Nano somehow. :)

No need to touch sketch. You can change settings with function button.