开云体育

It's going to be in pieces until I put it back together, which means adding an (RF) AGC, input voltage pick-off, "true" CW capability, a capacitive touch keyer, and 2.4" TFT color display. The latest

Just a clarification, am I simply adding the lines in yellow, or am I deleting the line that starts with sprintf and replacing that with the lines in yellow?

Took me a minute to figure out the power wiring. Here is what I did: Connect the orange wire from the VFO and the brown wires from both the PA power and PWR connectors to one side of the off/on

I was hoping they came from Diz. Someone said they bought off of ebay? Bad move if from China. 73 Ken

Our toroids have the highest pedigree, all bought from w8diz, the toroid king! - f

I'm a RTFM kinda guy, not so much a look at the pictures guy. I finally got all my parts in, finished assembly this morning. I half expected smoke and flames (said in jest), instead I got

Where were the toroids bought frm? 73 Ken VA3ABN

Despite some toroid specs that claim Al values to be within 5 to 25% I’ve found some to be as much as 50% off. Mike K5ESS Sent: Thursday, March 16, 2017 2:01 AM To: [email protected] Subject:

Jack When is your BITX going to be put back together? Seems like it has been in bits for a long time. I'll give this a try too. Thanks for the posting. Randy, K7AGE econjack@...>

Got mine today ! Ordered 2/16 Shipped 3/2 Arrived 3/15 it arrived in pretty good shape except the small parts plastic bag was torn so the hardware was rattling around everywhere. I can't make out

I bought this mic from Amazon for $7 and wired it up to a cat 5 connector. It has the same type of electret microphone that comes with the kit. I drilled a bigger hole for the mic as the one in the

All said, kits and parts charges less I suppose. I had bought from him three times till now. km4wii@...> wrote: -- Regards Sarma

In the updateDisplay() function, you'll find this line: ? ? sprintf(c, "%s:%.2s.%.4s", vfoActive == VFO_A ? "A" : "B" , b, ?b+2); This line needs to be replaced with the lines marked in yellow.

Can you share the item numbers of those items please? It's been a day or two since a bought something on Amazon and I'm sure they are wondering what has happened. Thanks 73 Tim KM4WII Tim - K7PTM

Even 8 turns 32uHis OK for mixer stages, I suppose, VK3HN !!! regards sarma vu3zmv -- Regards Sarma

I bought a uniden microphone from Amazon. ?It was listed as an electret microphone. ?I also bought the 4 pin panel mount adapter. ?All wired up, it works great and I get great audio reports.

Jack, thank you very much for the document and all the effort you put forth here and the other forums! Roy WA0YMH [email protected]> wrote:

I'm stuck exactly where peatmoss is. Infact we came up with the same code almost line for line. I am also off frequency and trying to find the best BFO freq that works and sounds the best. I am at the

I am almost 90% sure that c107 is present. Although the boards are at home and I am at work. :) I will verify when I can.

I used an old CB rig and replaced the mic element with the one in the kit.