开云体育

Hi Colleagues The best for all the Bitxers' family. Here it is a diagram?someone sent me a time ago to use my Bitx40 with Digital Modes. Please take a look, review and let me know to share with

Your noise may be higher than his. 72, Bob KI0G

With some contacts that I make with the Bitx40, I can just hear the other operator above the noise with some fading.? Even though the other operator is running 100 to 500 Watts, I don't think that I

Thanks Ron, Yes adjusted contrast.. Wiring is correct. I decided to get it from Amazone so I didnt have to wait 20 days... Bob, K6YN Sent from

I found a problem with power connector to supply.? The 5.1 mm or whatever size it is. I'll report back as I learn more. Chuck Tnx for the response.

That’s very odd….PWR should bring you RX and at least driver for the PA. PA-PWR is only for the final amp…and isolated (should be) from the rest of the board…. Verzonden: 30 January, 2017

With regular PWR connected and PA PWR connected there is RX. With regular PWR connected and PA PWR disconnect there is no RX Chuck AC7QN

Solved it by interchanging the 10k pots brown & red wires...!! Wrks fine now...i hv started making contacts already...though the vfo drifting issue is there. Wiring up a digital pll synth vfo now and

We got it. And with the regular PWR you do have RX? We still talk about PA-PWR or PWR? According to the schematics PA-PWR you should indeed not have lcd/or anything working and no power at all on

No relay action with PA pwr unplugged.? Also display goes blank when PA pwr is unplugged. Chuck AC7QN

With PA Pwr connected the sound of relay(s) is present.? With PA Pwr disconnected no relay sound (also display goes blank and display lights go off). From the schematic it appears PA pwr shouldn't

After Adding AGC (vk3ye) Audio is much better with out any modification in original Bitx40 v3 soudar vu2rjw

Sorry it didn't work... Jack, W8TEE To: [email protected] Sent: Monday, January 30, 2017 11:10 AM Subject: Re: [BITX20] VFO & Digital Read out Does Not work (where do I get software for the

i home brewed peter s (vk3ye) AGC working fine soundar vu2rjw wrote:

Backlight is working/you adjusted the pot to get good setting and checked the wiring and is matching the raduino script for lcdcrystal? Lcd for $10, there must be cheaper ones to get. Amazon is not

Dear Jack, THANKS, I compiled and UPLOADED with no new results. No readouit on Screen. I ordered a new screen from AMAZONE for under $10... Hope this works! BOB K6YN Sent from

Hi Simon: I wasn't criticizing your code at all. I, too, am self-taught (my degree is in economics) and can really appreciate that everyone has to start somewhere. I was simply trying to point out

Thanks Jack. I am a self taught using the heuristic that if it works ok when I run the sketch then it will do until it doesn't do what I thought it should. ?So I know my coding is not going to be

I would suggest the following changes: #define TWOMIN 120000UL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?// There's no reason to do the math at runtime The following statement belongs in

no Verzonden: 30 January, 2017 01:12 Aan: [email protected] Onderwerp: [BITX20] isolating BNC jack from metal case Hello, Is it necessary to isolate the BNC jack if using a metal enclosure?