开云体育

Thanks Jack. I am a self taught using the heuristic that if it works ok when I run the sketch then it will do until it doesn't do what I thought it should. ?So I know my coding is not going to be

I would suggest the following changes: #define TWOMIN 120000UL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?// There's no reason to do the math at runtime The following statement belongs in

no Verzonden: 30 January, 2017 01:12 Aan: [email protected] Onderwerp: [BITX20] isolating BNC jack from metal case Hello, Is it necessary to isolate the BNC jack if using a metal enclosure?

Mike, There is nothing of mine in there.? I started with Ron's (PA3FAT) sketch which has the encoder?stuff and removed the s meter code.?All I did was comment out the smeter and bargraph functions

Simon, Sorry to hijack this post... Could you please upload your sketch with the rotary encoder and voltage check? Thank you! Mike WA3O

http://www.ebay.com/itm/With-Turn-Counting-Dial-100K-Ohm-3590S-2-104L-Rotary-Potentiometer-Pot-10-Turn-/282211700523?hash=item41b520cf2b:g:hs0AAOSwLF1X90iu (

@John, I am sure everything is settup correctly. I also tried to press the reset button. Nothing helped. I did so many Arduino uploads in the past (for my RC models stuff) and never had that problem.

http://www.ebay.com/itm/Hot-10K-Ohm-3590S-2-103L-Potentiometer-With-10-Turn-Counting-Dial-Rotary-Knob-/191930538626?hash=item2caff39a82:g:~KAAAOSwZVlXlbEF cruisenewsnet@...> wrote:

Mods I've done. 1. DDS vfo - i got one of the pre raduino ones. 2. Remove cap between pins 1 and 8 of the lm386 and replace with a switch so there is both cap and no cap options. 3. Additional power

Bitx40 raduino, was low output, now no output.? Watt meter gives a quick spike to about .25W, then zero Watts. Any help is appreciated. Chuck AC7QN

My bad: Change this line: LiquidCrystal lcd(12,?11,?5,?4,?3,?2); to LiquidCrystal lcd(8,9,10,11,12,13); and report back. Jack, W8TEE To: [email protected] Sent: Sunday, January 29, 2017 6:05 PM

If you are going to mod the radio, I suggest you order a second one because they are easy to break and a second one provides a reference how to fix the first one. 1. The mod that made the biggest

Dear Joel, Thanks! Tried it .. no change.. B K6YN Sent from Outlook<http://aka.ms/weboutlook> ________________________________ Sent: Sunday, January 29, 2017 3:13 PM To: [email protected] Subject: Re:

Hi all, I have spent a long time trying to get a few of the "A" input features that are included in the raduino sketch working. Unfortunately I am having little success. The Calibration mode works as

Hi everyone, ... and greetings from Calgary, Canada I ordered BITX on January 9, and eagerly waiting to receive the package, it's still in transit. I want to thank Ashhar and everyone else who put the

Hi David, No need to isolate the BNC from the case. Joel KB6QVI

The "wire up" page on the hfsigs webpage still says to ground the brown wire to calibrate. Ashhar, can I suggest that this be corrected.? Regards Simon VK3ELH

Yes, receiving with any antenna is fine. It will not harm anything. Marco - KG5PRT

It was Raj in Bangalore (who has what has to be among the coolest of call signs!)

Hello, Is it necessary to isolate the BNC jack if using a metal enclosure?