开云体育

https://youtu.be/_sdM74ohKDo?si=qiRAIiITX2IpS_Iw

https://youtu.be/L7xNsmRBx_s?si=QA8FRFZqjF9c75OS

https://apps.apple.com/app/id1464477788 [email protected]> wrote:

https://apps.apple.com/app/id1464477788 [email protected]> wrote:

https://news.ycombinator.com/ask [email protected]> wrote:

Hi Niles, How to adjust the calibration depends on the software version you are using.? ?I highly recommend switching to the 64-bit version that JJ leads: https://github.com/drexjj The calibration

Hi Antonio, What software are you using for the Nano?? That can influence the calibration method. Since it is receive only, zero beating is the best solution that I know of.? Any known CW, AM, or FM

https://geoffg.net/picomite.html

?Can anyone tell me how to adjust the frequency offset on the Sbitx? To hear any frequency ie 7.196 I have to use 7.196.3 … the truSDX has a setting for this and I am hoping this radio does as

Hi everyone, I built a uBitx v5 (so 11.059 filter) from scratch only receiver. I know it's an obsolete and trite topic, but I wanted to ask you if there is a good method to calibrate its VFO and

Is there any way you can carry a cable to connect direct to a router in where ever you are staying? I am an old newbie but I can connect my Bridgecom hotspot (for DMR) direct to the router in the

Has anyone activated the auto-hotspot feature on the zBitx and can explain how to do it? I do have VNC running and I am connected to my WiFi, but I want to be able to connect when around unknown WiFi

The receiver noise would go away if the waterfall could be stopped. Could someone put a "Wfall on/off" icon in the SET or MENU functions that would stop the waterfall. It would be nice if the CW

The qrper.com review of zbitx ( https://qrper.com/2025/04/first-look-at-the-hf-signals-zbitx-qrp-transceiver/ ) says: Your fifteen minutes at 4.5W would mean the batteries were asked to deliver 60

Built this wiring harness this afternoon to convert a HT Mic(Kenwood connector style 2.5mm/3.5mm) to the Zbitx, and I assume it would work with the sbitx. The microphone's speaker is amplified, I

Unfortunately, SATPC32 does not appear to be able to do CAT control via Hamlib (otherwise it would be easy to control the sBitx)? -- but it can control ICOM type CIV on "Radio2"? ? Unfortunately,

I finally managed to boot from an external USB on my zbitx. I had to modify /boot/cmdline.txt? on the internal sdcard to point rootfs to the external device UUID. Of course if I remove the external

Great advice, Dave! The loss through the coax is considerable and I should reduce that length and improve that problem. As for power output I haven’t measured it, supposed to be better than 30 W.

Today I managed to do three POTA activations with my zBitx. Everything went fine, with the only exception that I couldn't complete QSO with those using complex callsigns. Below is an example of

Took the next step this morning and brought up 'web mode on both my desk top PC and my tablet. This is an awesome feature.? Sitting at the dining room table on my tablet and connected to my zBitx in