开云体育

The zBitx display stops responding to the mouse scroll wheel or keyboard up/down keys after a few clicks. Jim N7IHQ

I have the same problem with the scroll wheel on my mouse. The values changes intermittently. It works ok on OS windows. Jim N7IHQ

Here's the keyboard/trackball I plan to use: https://www.amazon.com/dp/B094VVL7Q9 I got this one because the keyboard isn't quite as tiny as the one I'm currently using. It's really for two thumbs,

One of the things going on, which may or may not impact overall performance, it that (as I understand it) the zBITX is using a 64 bit RasPi Zero 2.? But as released, there is a 32 bit RasPi OS

To clarify, I utilize RealVNC to remotely control the WSJT-X FT8 interface on the ZBITX system. Gridtracker, installed locally on my laptop, runs concurrently. The RealVNC client resides on my laptop,

Hi Steve, I just had a WiFi RealVNC connection - I did not have any HDMI monitor, keyboard, or mouse connected. 72, Jody - K3JZD

Steve, For remote locations I installed Tailscale on the zbitz. Super simple Tailscale provides a free VPN access for nearly all devices, Linux, windows, snology nas Android and iPhone. On your pc you

Thanks for that input.? I think it helps set expectations quite well. As a sbitx owner I think I'd find needing a break after five QSOs for the rig to cool down a bit frustrating, yet the sbitx is

Hi John, No, I did not try doing it that way.? ?I had no problem adding debounce to version 3.021, where only the falling edge needed it.? What I ran into while trying to debounce version 3.052 was

For those following along at home on my WIFI issue: - I discovered by using raspi-config and selecting a desktop size, I no longer got the difference in RealVNC in desktop between having an external

Great report! Gordon KX4Z [email protected]> wrote:

As another new user, would you mind sharing where you found the shutdown changes and CW fix please??? Besides this group and GitHub is there another place I should be monitoring for such

Thanks for the tip Andy -- Gyula HA3HZ

I can't find how to select different macros on the zBitx, or for that matter in the terminal app display. I want to add some macros, and be able to select them for default at power up of the rig when

I just installed Karl K5KHK's changes that add a Shutdown command to the Menu, as well as include Jody's K3JZD's CW fix. This makes for a very usable CW rig. I also "discovered" how to operate from a

https://appclip.apple.com/id?p=com.nomtasticapps.ainotes.Clip&shareId=E23A1F42-00FB-462C-A39B-7FA3F2203461

To fix encoders with detents is straightforward. Unclip the cover, remove it and the shaft, push down on the detent spring, and reassemble.

A USB GPS would work, you could set it up as you would on an RPi on its own, I imagine. The TTL GPS *could* work if the zBitx hardware isn't using the TTL Serial pins on the RPi Zero 2W, I don't know

I just found this on AliExpress: ￡2.70 | 12V24V to 9V5A power step-down module 12V to 9V DC transformer 24V to 9V car converter https://a.aliexpress.com/_Ewl3PTu I've just had this delivered from

Thanks Joe.?? Desktop size change here was very obvious from with HDMI monitor connected to without.??? RealVNC has been up and stable this morning without the monitor attached for on the order