开云体育

Hi John, No, I did not try doing it that way.? ?I had no problem adding debounce to version 3.021, where only the falling edge needed it.? What I ran into while trying to debounce version 3.052 was

For those following along at home on my WIFI issue: - I discovered by using raspi-config and selecting a desktop size, I no longer got the difference in RealVNC in desktop between having an external

Great report! Gordon KX4Z [email protected]> wrote:

As another new user, would you mind sharing where you found the shutdown changes and CW fix please??? Besides this group and GitHub is there another place I should be monitoring for such

Thanks for the tip Andy -- Gyula HA3HZ

I can't find how to select different macros on the zBitx, or for that matter in the terminal app display. I want to add some macros, and be able to select them for default at power up of the rig when

I just installed Karl K5KHK's changes that add a Shutdown command to the Menu, as well as include Jody's K3JZD's CW fix. This makes for a very usable CW rig. I also "discovered" how to operate from a

https://appclip.apple.com/id?p=com.nomtasticapps.ainotes.Clip&shareId=E23A1F42-00FB-462C-A39B-7FA3F2203461

To fix encoders with detents is straightforward. Unclip the cover, remove it and the shaft, push down on the detent spring, and reassemble.

A USB GPS would work, you could set it up as you would on an RPi on its own, I imagine. The TTL GPS *could* work if the zBitx hardware isn't using the TTL Serial pins on the RPi Zero 2W, I don't know

I just found this on AliExpress: ￡2.70 | 12V24V to 9V5A power step-down module 12V to 9V DC transformer 24V to 9V car converter https://a.aliexpress.com/_Ewl3PTu I've just had this delivered from

Thanks Joe.?? Desktop size change here was very obvious from with HDMI monitor connected to without.??? RealVNC has been up and stable this morning without the monitor attached for on the order

Ed, New user here.? Got mine at Hamvention. The cool thing about the zBitx (among many) is that it's running on a fully functional (as far as I know) Raspberry Pi, thus, you can pretty much do

I have been running the ZBITX for a month or so. My experience is no issues with wifi. I connect with real vnc both locally and at remote locations. I almost always have a 14 inch touch screen ext

POTA a perspective, many activations with zBitx. Usually get five contacts in before taking a break for heat dissipation. My fingers are my gauge. Running the radio at 75% drive usually change in a

Would love to see some close-ups of your elevation setup with the linear actuator! What material did you use for the elements on your yagis? I’m on the same journey right now. 73 de W0ZF

Having fun with mine as well.?? I did not bother to try the OTG adapter at all, but I've been doing stuff with various RPis for a while so I had several of the necessary USB and mini HDMI adapters

I wasn't talking about that situation, but you might be inadvertently pointing out why it is not the perfect POTA/SOTA solution: should you have to supply 3.5A at 7.2V = 25W to a POTA radio to make 5W

Hey Jody, When you were running RealVNC in your configuration, did you also have an external display hooked up?? Or were you just connected to the device with RealVNC? When I was running yesterday I

Beautiful work Gordon! Very impressive. 73 KI4QCK