开云体育

I would begin by checking the antenna connection solder connections with both a magnifying glass and ohm meter. Compare with the schematic and check for faulty cracked connections or parts. If the

Just substituted my uBitX for the Sbitx, worked perfectly, both radio and the out board meter showing power and 1:1 match with the antenna. The Sbitx still shows high swr on the radio and the meter.

How dry is it?? ?Could some moisture got into someplace from radio to antenna? Has anything been undone before this happened or the coax itself been flexed too much? Have you ran a continuity check

Sbitx - antenna switch - swr/power coupler - antenna Previously radio showed power and 1.0 swr on 15, 20, and 40 meters with similar readings on the off board meter. As of this morning swr on the

Ron : I will have to spend some time with the code snippet that you highlighted - I do not have any experience at all with the gtk library. Gordon : I thought that mine had crashed with version

My zBitx has been listed as packed and ready to go.? ?My number is 3926.? ?Just waiting for tracking info. Thank you Jim KE0VVU

RIT and SPLIT do not work with ZBitx. I think you should reinstall the memory card. I had no output, but this helped. HA8LKT, Laci Raj vu2zap via groups.io <rajendrakumargg@...> ezt

You can try adjusting the scope size to see if it resolves the issue. It is in menu 2. -JJ

First thing I spotted. You have a good eye Gyula. Raj

you should turn the RIT button off! That's why there is some difference between the transmit and receive frequencies. RIT shifts the receive frequency in the + or - direction. -- Gyula HA3HZ

Subsequently with research I think I need to look at at Split configuration on FT8. I am away from the shack and will need to investigate when connecting a External KVM. I occured to me that the

My sBitx can be left for hour after hour & never crashes. So NEW CODE for the ZBitx might be the hunting ground & display code probably changed… Gordon kx4z

What causes a crash??? Typically pointers to zero, buffer overruns, memory leaks, pointers to auto class variables.? Others? My C skills are very rusty but this function looks suspicious to me as

Going to wait for the SBITX V4. Barely used for SWL plus 4 batteries and a 2-cell charger. $230 shipped within USA. *

I have been compiling right on the xBITX device.? I use SSH and Putty to login as? ?pi / hf12345? ?and get a terminal window.? ? Then I do a? ?cd? sbitx.? ?There is a build script there -

I am 3926 so when I hear I will post. Thank you Jim KE0VVU

Hello Team, Can anyone explain and assist as to why there is a defecit on FT8, a 25Khz drift between RX & TX frequency If I set my RX to 14.059 on 20M and then track on PSKreporter I can track

I have a problem with the timestamps of the zBitx logbook. They are 8 hours ahead of UTC. And yes, I changed the country and timezone. The web interface shows the correct UTC and local time but still

Jody, I see something similar, though the sbitx program seems to keep running. After a while (anywhere between 15 minutes and an hour) the tcp connection dies. I had the web interface running and an

Hi Gordon, yes I have been following Jody’s efforts pretty closely. As someone who worked in real time embedded systems for most of my career, I have no doubt the CW timing issue is fixable. Jody