开云体育

Lots of discussion about DT already here /g/BITX20/topic/112513670 and I've logged it as an issue here https://github.com/afarhan/zbitx/issues/52

This has already been logged as an issue https://github.com/afarhan/zbitx/issues/33

Jim, The usual PD setup for operating a ham radio, since my article on it in QRP Quarterly several years back, was either a mains-supplied charger that supports PD voltages and currents, or a battery

I just downloaded and installed your version on my uBitx V6, and it's much better than the stock firmware, great job! I do have a question, looking through the code, and that's how do I add to the 5

Really? Shipping Chinese 9v power adapters from via DHL? HF Signals would have to import them from China, stock them, then resell them and charge shipping. I think HF Signals is doing the right thing

Can't find who posted this PS but it works very well! Straight plug and use on the zBitx. HFSignals would do well to offer this model as an option. Ronny W4TRI

In addition, I see that the zBITX is currently 1.6 seconds DT when monitored on my IC-7610 that is GPS locked.? I wonder how to correct the clock inside the zBITX even while it is currently connected

Hello I received my zBITX in their 2nd shipment release a few days ago. I have linked it to my WiFi, an easy task.? It's internal clock should be locked and on time now. I then went on 20m to make a

Hi Gordon, That's my thinking also.? If I can get a GPIO Interrupt on key-down working, having that enable Tx Mode would be my first step.? Have not though it out beyond that - I'm just taking it

Was it right at 4 weeks?? I ordered on the 11th.? So I guess I'm about 5-7 days from shipping. Nelson AE5NL

Bioenno has 9v batteries if you want to trust a Lipo pack.

You guys might try putting a big electrolytic capacitor across the output of that switching power supply. Like two or 3000 ?F. Gordon kx4z

I listened to my own FT8 signal. Unfortunately, it wasn't clear. Yvon AE7YD via groups.io <Yvon@...> ezt írta (id?pont: 2025. máj. 4., V 19:56):

I did not noticed it on mine but maybe I didn't test it right. How did you check it? On the reset able fuse, I tested it yesterday night and discovered that it takes over 10A and too many seconds to

I don't believe any capacity beyond 4000mAh. Or maybe somebody can explain why I pay $15 for a single 3600mAh cell but $3.95 for two 15.000mAh cells including a charger at Ali's. Simple check: check

Link 18650 lipo 9900mA. https://www.aliexpress.com/w/wholesale-18650-9900mA.html?spm=a2g0o.home.search.0 Most, be careful to handel and use. 73 Matjaz S56ZVD Robert Fairbairn via groups.io je 3. 05.

After working with Unix/Linux systems for a lifetime, i know that bad stuff will happen if you just disconnect the power on a regular basis. I still feel a twitch in my fingers if I don’t run sync;

HI Yvon AE7YD. I bought this too. Unfortunately, the FT8 mode contains 50Hz noise. The power supply needs to be modified. I am working on the modification now. HA8LKT Laci Yvon AE7YD via groups.io

sorry, I missed the end of the link: https://www.amazon.com/dp/B08C7DTMRL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

If it is anything like the sBitx, a separate correction to the tx/rx switchover code is required.? ?I havent' studied the zbix code.? Glad that you found that it worked! Solutions are showing up