开云体育

Enable Bluetooth on the desktop turn on your keyboard and tell Bluetooth to scan for devices. ?You can then pair from there. ?On Linux I usually have a problem where Bluetooth wants to repeatedly

I had already executed this command without success. I had already executed this command, without success. Everything is still as shown in the pictures. Am 02.04.2025 um 20:30 schrieb Ashhar Farhan

https://ae5x.blogspot.com/2025/04/timing-issues-remain-with-latest.html 73, John AE5X

On that prompt, type ./build sbitx wrote:

Hello everyone, I understand that the zBitx has Bluetooth onboard the Raspberry Pi. Is there a way I can set up my Bluetooth keyboard with a track mouse to the Raspberry Pi on the zBitx? Any

Hallo! After updating the zBitx software and firmware, the zBitx no longer starts properly. Repeating the update does not work.. What can I do to get the zBitx working? vy73 Frank

I use these to help dissipate the excess heat. Slap them on back and let them do their job. Also use on Xeigu 6200. https://a.co/d/bpyIFQg

What was your order number

Ryan, I'm sorry to hear that the zBitx arrived with a crack. I'm guessing the parcel had a rough journey to your location. Can you share some photos of the radio and the packaging with us. You can

Hello All, I wanted a dimpled knob for the front of my zBitx, so I turned to Thingiverse to find a suitable knob and adjust the size to what I wanted and 3D printed my own in black PLA. The knob I've

Ensure your software and firmware are at the latest versions. I also have found a power cycle helps with this.

Hi Farhan I loaded firmware 1.06 and I am very happy the chugging sound has gone from cw reception. This afternoon listening on ssb 20m I did notice some less pronounced chugging sounds. I will try

Mine doesn’t seem to do that. I’ve never seen a power output or SWR there. 73, Paul, N8HM [email protected]> wrote:

Ragav Thank you so very much !! Now Im a happy bunny. unzipped and then flashed another 32Gbyte SD-card I had laying around. Im using "Balena Etcher". Again - Im a bit concerned with the fact that

When you TX, you'll see power and SWR: [image: image.png] This snapshot is from the manual, available

yes it does Nigel MW0NDE [email protected]> wrote:

Yeah I think the new software update is an improvement but some of the keying is still rough around the edges. It definitely helped with the chugging sound. [email protected]> wrote:

Just Curious if the zBitX has any SWR monitoring or display? Regards, Everett-WB9FUW

1) does or could the transmit frequency show on the FT8 waterfall , currently only a red/orange line shows at the receive frequency. Maybe I am missing a setting? 2) Also on FT8, make the second

Just want to report I received my zbitx yesterday. ?It did have a crack in the side panel and there was something rattling inside. ?Took it apart the rtc battery was loose. ?Connected to my bench