开云体育

Gyula, Thanks for the detailed operations but I think I answered my own question. With the new Pi4 I flashed an operating system and installed it. Insert sd card and Pi works like a Pi should but

Quality time understanding “git checkout”. All is well: Encoder selection with FT8 works Time synchronizing on startup. Log file shows on the radio screen Thanks, now trying to figure out

This type of connector is a pretty generic thing. It doesn't have a name like 'powerpole' or 'JST'. Per the drawing of the part I use in my product, it's called: Box Header, Right Angle PCB Mount, 2

You have a uSD card with a 32-bit operating system, which is located in the uSD card slot of the built-in RPi4. If you downloaded the sb64p3.img.xz compressed file to the Downloads folder, then

Today I installed and tested firmware version 1.05 / 3.05. SSB and FT8 work as before. There is a delay in both modes of about 1 second when switching RX/TX. In SSB this is not ideal in contests and

Thanks Jeff and Gyula (I went through this thread and saw the website. I don’t think the name of the connector is there. Or maybe I missed it).

Did you make the image on the new SD card with a program like Balena etcher? It has to be done a certain way so the sBitx will see it as the operating system. David [email protected]> wrote:

Update? on Monday: I downloaded 64 bit Pi OS and installed it in a new Pi4. I made a backup image of what is on the sBitx v3.0 onto a thumb drive. I found all the user files and copied them onto a

There's lots of variants, but here's the one I use: P/N: BHR-10-HUA https://www.digikey.com/en/products/detail/adam-tech/BHR-10-HUA/9832515 Jeff

If the sbitx version doesnt show 3.05 after update, you maybe on the wrong branch. So, before you run ./update, type: git checkout main To switch to main branch of code, then

Post videos! [email protected]> wrote:

Only get 3.021 using ./update ??? Thanks for pointing to a newer version. Tim

That sounds a great project.? I have a 5.2 MHz SSB crystal filter lying idle that I have long thought of making into a rig.? But I already have an old analog SSB rig that I built back in the

Ahead of Jeff: https://www.etsy.com/listing/1737786929/sbitx-encoder-replacement-board -- Gyula HA3HZ

Hi Jeff, Please what's the name of the connector on the board? Can you kindly share a link to it Thanks

Why only 18? Current sbitx goes much faster! That seems like a serious limitation…… 73 Gordon KX4Z

ps.: Sorry, but I remember useful information later. When you have successfully set up the Image, and you have completed your personal data and application settings, it is advisable to make a Backup

I got updated to 1.05 / 3.05. Everything I have tested look s good! WHAT A GREAT TRANSCEIVER!!! Thanks.......

Dean, since you are very new to the rig, it is worth doing it as you described. What Wojtek writes requires more knowledge about what and why you are doing. But don't worry, because in a few days or

The morse keying is now in a separate thread with critical priority. Pse read modem_cw.c . I can manage upto 18 wpm on the iambic key now [email protected]> wrote: