开云体育

I ordered a PD USB-C -> 9V tonight. But I ordered it with the fairly standard 5.5x2.5 barrel plug. Not realizing the zBitX used a WAY smaller barrel. What IS that size, anyway? I'll see if I have an

Updated the firmware. Plugged in a HDMI screen Still after 10 minutes no joy. I'll try a few more things, then set it on the shelf and hope a solution shows up. It's been recycled many, many times

https://www.batteryjunction.com <https://www.batteryjunction.com/checkout/cart/> has a good selection of 18650 rechargeable flat-top unprotected batteries and chargers at good prices. My zBitx works

To update the time. Connect to the HDMI port a monitor and using the OTG dongle to keyboard and connect the radio to your wifi and it will take the time up [email protected]> wrote:

As said above mine is 20-30 seconds. Have you restarted the radio. If that doesn't work. Try to connect to a monitor via the HDMI cable and connect to the wife and do the

First thing to note is the firmware is 1.02. I'm unsure how to upgrade it, but I saw there was a topic on it, so I'll try that. Second thing to note is that most of the interface chrome is working

10 minutes and it's still hung-up with the message. Tom KT4XN ________________________________ Sent: Wednesday, March 26, 2025 8:10 PM To: [email protected] <[email protected]> Subject: Re: [BITX20]

Takes 30" to boot with V1.04.

The video showing how to do it is on https://youtu.be/Ii7MHGMr_dE [email protected]> wrote:

You can, at a pinch even go up to 12v but I wouldnt transmit with 12v. The advise is anywhere from 6v to 9v. The specs are upto 12v. The back panel that doubles up as a heatsink can't take more

This might be a silly question, but… how long did you wait? From the videos it looks like the display boots instantly, but it takes awhile for the Raspberry Pi to boot, during which time it displays

Don, No one said 8.2 volts was a "requirement", Farhan said that's what he has always used to power his zBitx. I'm sorry if my previous post confused anyone, my intention was quite the

Had that happen as well. I believe it went away when I rebooted/pull the power again. The other step I did do was connected it to a micro HDMI to connect to my wifi <crowleytj@...>

Just received my zbitx.? Plugged in the batteries and the unit is hung up with the message: zbitx firmware v1.02? Waiting for zbitx to start... Has any one seen this and how to get the radio

On the side of the case it says 6-9 volts. My test sheet that came with the radio says they tested with 8.6v and fully charged 18650 is 4.20 each. 8.4. [email protected]> wrote:

So, Help. Please.... I'm confused, re: the input the DC power supply. 1. I thought I understood the input dc power requirement was 9.0 volts (using a barrel connector). *SO I bought one.* 2. Now I

The documentation should be here in the next 12 hours. But here is how you upgrade the firmware: 1. Go to https://www.hfsignals.com/index.php/zbitx/ 2. Download the uf2 file to your computer. 3.

I ordered a 12v buck converter with adjustable power output. Thought is I can use my current collection of 12v lipo batteries and still power the Z [email protected]> wrote:

Thanks! [email protected]> wrote:

Ken, I have been using flat top 18615 with a small charger pcb I bought for about a dollar. It is a 2S charger with a usc c connector at the other end. I can use my phone charger to charge the