开云体育

In sBITX-Toolbox-Manual is a list of considerations and some brands/models known for good compatibility based on user reports and general Linux compatibility. At this basics I bought and tried

Reached a point of diminishing returns on this internal noise issue. Here’s what is effective: 5v DC-DC converter (Drok) upgraded. Single board LPF on converter output. Proper grounding on

I have not yet tried the usb microphone, but how does the ptt/ vox function work? Could there be an issue there instead of audio path? Please fill me in. Thanks! [email protected]> wrote:

@Jens Would you be able to share with me the manufacturer and model of the USB headset you are attempting to use? Also, what other devices, (if any) are attached to the USB ports of the sBitx?

... here is NO ROUTING for RX/TX audio between sBITX and headset ! Sent: Friday, July 12, 2024 9:04 PM To: [email protected] Subject: Re: [BITX20] sBITX-V3 : USB-Headset not working In the sBitx

... all that I have studied . Helps not . Sent: Friday, July 12, 2024 9:04 PM To: [email protected] Subject: Re: [BITX20] sBITX-V3 : USB-Headset not working In the sBitx ToolBox Toolbox Guide

In the sBitx ToolBox Toolbox Guide v2.7. pdf ( https://github.com/drexjj/sBITX-toolbox/blob/main/sBITX%20Toolbox%20Guide%20%20v2.7.pdf ) , there is a 'Special troubleshooting' chapter at the end of

Hello ... after lots of trouble I had really decided to funeral the sBITX and won't spent more time and waste no more time with my sBITX-V3. But I have bring it up again on the homebrew table since

There are a several in the files section of the group. ?I prefer the N8me variant with mods

Hello ... after lots of trouble I had really decided and won't spent and won`t waste no more time with my sBITX-V3. But I have bring it up again on the homebrew table since two weeks ... and

Ron, that was it! At least I think so...I need to do a little more testing. There are a lot of repos...is there a preferred 'third-party' firmware for the stock display? [email protected]>

Herewith I share the schematic and the Gerber files of the Pi-HAT I designed for my sBITX HB. Regards Charudatt – VU2UPX Sent: 12 July 2024 21:14 To: [email protected] Subject: Re: [BITX20]

Good morning. If possible, yes please send me the gerber files for your pi Hat motherboard. All the best, 73 de VA2GJ Gérald [email protected]> wrote:

If you are using the original sBitx spacer, then an M2.4 screw is the correct size. -- Gyula HA3HZ

What thickness are the screws that fasten the raspberry pi to the sbitx board?

I sort of remember that the change from USB to LSB or back doesn't take effect until the frequency is changed when using the stock firmware.

And JJ's 64Bit version of the sBitx OS comes with Debian 11 "Bookworm" and that already has a WiFi "HotSpot" feature built in. -- Pete VK3PYE

Set up Wi-Fi without a wired LAN in RPi Config, it asks for a country setting. (Raspberry icon-> Preferences-> Raspberry Pi Configuration-> Localization-> WiFi Country) Then click on the red xx

Can we add a Wi-Fi manager to the Toolbox so that we can add a network easily ? Jason (ACK) has a good utility for this in his build. I booted my RPi with the 64bit OS with a LAN cable to the

Back in msg #103870 Gordon Gibby talked about relay noise in the DE. I think as part of the effort to reduce the risk to the finals, a workaround was implemented to switch the LPFs every time the key