开云体育

Is this command only for FreeDV?

Thanks, that's very helpful.? I have a pi hat and Pi Zero 2 W and have literally been trying to figure out which way is up and how to plug the Pi into the hat and make sure all the other pins exit in

Yes, you have to burn it to a new sd card, as the github description ( https://github.com/drexjj/sbitx/releases/tag/sBitx-3025-64b-Prod ) says. -- Gyula HA3HZ

Sorry of the newbie question. I know enough about Linux to be "dangerous" . With the new release can I do an in-place upgrade or do I need to burn a new SD card?

Thanks for the feedback. I have sent an email to HF Signal via their sales email address. We'll see what they suggest as a course of action Joe N7QPP

Joe: The power output of mine was OK for about 20 minutes, then dropped to zero. Repositioning the radio on its back suddenly restored a few watts of power out, suggesting a bad solder connection or

This was not a kit unit. But a unit purchased assembled at Hamvention. Joe N7QPP Sent: Monday, June 10, 2024 2:16 AM To: [email protected] Subject: Re: [BITX20] FT8 Power Pou You must do power

You must do power calibration. Instruction on sbitx.net. Bye Carlo

Hey Gang.. Because this release was being packaged up as I was still finishing a few things, There is 'minor' update waiting in the repo for the FreeDV_PTT application. One thing that will come along

Not at this time. I will work on this in the future. -JJ

Can I upgrade with a direct order?

P.S. For those of you running DE hardware, I've also included the 3.01 sound file in the download folder and a script to "downgrade" and recompile the sBitx app. To run this, open terminal and

I published a new, preconfigured, Raspberry Pi image for the sBitx this evening. This is the production version, code name, "Field

On 20 Meter FT8 I am only getting 7 watts output. Seem low to me. Yes the drive is at 100. I am using a PI4 with 8GB and running the 64 bit version. The antenna is a resonant 20 meter vertical. Any

The Kits and Parts HYCAS IF amp has been installed into my partly torn apart Daylight Again and I am impressed! Per the information provide by John, KU4AF, on the amp matching of both the detector and

Don’t want to pile on but I would really like the feet too. I don’t have access to a 3D printer. I will gladly pay for them and postage. --Tom WW8LA

Sure, no problem. I will let you know when they ship. Howard

My board has a bad and resistor going to the AF Amp. I am not at home to check the details but see </g/BITX20/topic/105501603#msg110645> You can check the voltage at the lm380 to see

If you want to know more, check the LM380 IC datasheet ( https://www.ti.com/lit/gpn/LM380 ). The speaker is 8 Ohm, the maximum output power can be 2.5W. Pay attention to the supply voltage, because

Do you have the IF Gain turned up? -- Hank W6IR