开云体育

I got into where you said but there is no sbitx folder or shortcut I have less than 15 min on this thing and I am not impressed especially if I can't start the radio

I am curious to know of the problems you have with the 64 bit version? What type of issues are you having? It is difficult to improve my product without honest feedback :( The sBitx behaves similar

I have been thinking on this and I have a basic design completed, but I need to think on it some more. It would require you to solder a single wire to the board, but the rest would use existing

I realized this morning that this question had been asked before.. in my defense it was 3am when I posted that… Any direction to the portion of code that handles that would be greatly appreciated.

How did you get the increased content on your HDMI large screen example? The holiday beach condo has a large screen TV with HDMI connection, I have the cable for a second display, and it works well.

Thanks, Margaret. 73, Bruce

Check it out.? Two videos and some still photos.? Lots of good BITX tech talk.? https://soldersmoke.blogspot.com/2024/06/farhan-talks-radio-tech-at-soldersmoke.html 73? ?Bill N2CQR

Thanks for the quick response, JJ. Here's what I got. ~/sbitx $ ./sbitx sbitx v3.02 gpio: Unable to open GPIO direction interface for pin 17: No such file or directory wiringPiISR: unable to open

Good morning. You might simply have corrupted some files. How do you shut it down? The computer pi needs to be shut down correctly as a regular computer. Then wait about 10 seconds before you flip

Very interesting but I prefer to avoid soldering on the board... Js8call has a "ptt command" option that call a script when the ptt state change. In the worse I will use a USB serial adapter with

The difference of taking TX from pin 2 to 74LS08 (5v) and exiting Q9 (12V)? makes a delay Q10,Q101 and Q9?

If my information is correct, this sealed box contains the same circuit that is installed here. The difference is that the metal box shields the 150 kHz. Since the box cannot be opened without

Carlo, Gordon KX4Z dealt *with the topic ( /g/BITX20/topic/103300785 )* , you can find his description here. Make sure the disconnection is correct. -- Gyula HA3HZ

ps.: If you don't know how to do this, I'll describe it: You start the File Manager, then find the sBitx icon in the /usr/share/applications folder, which you select for copying. After that, go to the

Hey gang I haven't started the deep dive yet, But I am looking for any way to narrow the TX bandwidth under digital mode. The low/high settings work great for RX, but to be a good steward I'd like to

Hello, Has someone an elegant solution to extract a ptt signal to control accesories on the antenna side of sbitx (power amp, antenna switch, qrm eliminator, etc.). I read about a USB serial adapter

Try running it from the terminal: cd sbitx ./sbitx If it starts up fine, then your icon file is damaged. The error message also says this. It points to an unknown path for me. If you know the File

All was good I shut mine down then later started it up but when I click on the icon to start the radio I get a error message saying invalid desktop entry file and won't start Any help is appreciated I

Hmmm. That's a new one to me. I just did a full upgrade from RC1 and rebooted. sBitx loads fine for me. Go to terminal and type cd sbitx ./sbitx see if it throws any errors and report back.