开云体育

Hi Mark. It looks like you are building from a 64 bit OS. You can try loading the RC1 image on the SD card or simply install git and clone this repo https://github.com/drexjj/sbitx *cd $HOME * *sudo

When you get your sBITX it comes with a micro SD card already set up with the operating system and sBITX already loaded. I believe it is 32 bit system. -- '72 Aaron K5ATG ( http://k5atg.com )

Hi Jeff, I would be interested in two with the parts included. 73 Evan AC9TU

Would be interested in 2 when you get it finished as I have 2 V2s Gerry Sherman Sent by the Windows 11 Thunderbird

Morning All I'm late to the sbitx party but have ordered a board from HFSignals and am trying to build the software on/for my Pi4. What baseline OS do we need? Is it 32 or 64 bit? I'm struggling

This is still a draft, need to double check the encoder footprint...? I'm not sure what encoder is in the radio, and the footprint I have needs a bit of tweaking to fit the right encoder.? (In

Turns out I do have some time today.? Pulled my radio apart and here's the correct schematic. While 5v is ran to pin 9, it doesn't connect to anything on the encoder board.? I should have a PCB

Yeah I plan to use large ground planes on both sides with lots of vias to tie the two together. I've thought about adding ferrite beads to the data lines as well, but not sure that would do

I have not spent much time looking at the encoder, but as I remember, the extra components added were intended to debounce the contacts. Another individual said all debouncing was done in the

So here's what I'm currently assume the schematic to look like.? I need to take my radio apart to verify, but I won't be able to do that for a few days.? If anyone else knows if this is correct, let

Have you tried running on battery power to eliminate power line/supply noise? 73 Evan AC9TU

I have a persistent birdie at the top of the passband.? It shows up on all bands and doses not move when tuning.? It is not audible because it is too high in frequency to be heard but, it shows up

With my latest improvements the world map now has?pins (dots). My version for the sbitx v3.02 software?runs on the sBitx v3 box (my is upgraded from v2) with the original 32 bit OS. The web

Thank you Evan -- '72 Aaron K5ATG ( http://k5atg.com )

How is it used?

Hi Aaron, I found this page on the internet: https://marsradioglobal.us/operation-faq#:~:text=The%20primary%20frequency%20is%2013.927,11.407%20mHz%20is%20also%20monitored. Based on that information,

Hi Calvin, You do not need to "erase" the Nano. Simply load a new program on it, and the old program will be erased. The stock TFT display does not work with any of the KD8CEC programs. You can load

Hello all, hope all is well. For once I'm not making a topic about some BITX radio that I broke. Well my sBITX did break but I'm waiting on Farhan to get back to me to see if my repairs work. He is

As a newbie with the uBITx v6, I was eager to try different firmware and I loaded a version that was probably not compatible with the original TFT display, leaving me with a white screen. ?After

i figured it out? no need for help bob