开云体育

JJ, The kbd crash is fixed in the latest update. Run update and see? I haven't run JS8Call yet. I haven't found any peers to test it with. If anyone on my hemisphere is willing to be my test buddy, I

The site indicates that these are on backorder. Also the link to the documentation is broken. I was wanting to get these for my Bitx40 and uBitx6. Steve W5RRX Sent: Sunday, March 3, 2024

Thanks, JJ. I had originally searched around a bit myself and saw slightly different directions and suggestions on various pages, so I wasn't entirely sure what was what. Your notes of what links

Jeff and Gyula, I still cannot go downstairs to my sbitx to help search for the JTDX issue.? I did think of one possibility: Heat caused a slowdown of the processor.? Alarms are turned off in the

v2 was stable and synchronized fine with Internet. V3.02 drifts 2 seconds during an hour or two. It is best observed in wsjtx where DT shows the drift. The built-in FT8 does not display DT for some

John, Forgot to include his website address: https://www.f4huy.fr/2020/01/05/lubitx-v5/ 73Davidac9xh

John,these are pics off f4huy website. he is using a v5 ubitx for the base of his transceiver called the l ubitx here are some pics hope these help, 73Davidac9xh

Hi Ecca. You can perform a recal using the information from the wiki.. * Transmit power calibration * Discussion of the hw_settings.ini file: link1 (

JJ here is a video of that volume anomaly I found.

I probably should have specified I am using a v2 board.

I didn't realize this was a thing until my original card was long lost. How would I go about calibrating or creating a new hw_settings?

IMHO that is one of the things this radio lacks.??I glad there is an option to buy a kit

Thank you all for sharing your trials and tribulations with the software build as I noticed some minor errors as well. * JS8Call is not setup to use the proper soundcard output * The KBD crash is

Yes, it works. Feel free to use the File Manager. First you copy it to a USB stick, then back to the new SD card. -- Gyula HA3HZ

Well, my problem is how can I copy the folder from the old card, does it work with copy/paste?

I recently received a version 5 ubitx that was damaged in shipment.? The speaker came loose in the case and broke some of the filter inductors loose from the board.? Is there a photo of this area to

So how does this “install” onto the sd card then? I am not fluent in these sorts of activities so I need a little help getting the disk written. Do you have a txt document detailing how to do

G'day Steve. JJ explained on his github page : * Copy over your hardware calibration settings file to (/home/pi/sbitx/data/hw_settings.ini) Apparently, the sBitx v3 should NOT be calibrated, only

Sorry, I was a bit hasty in describing the error. After I installed JTDX and started it, I saw that I had different times in different places. It's a 64bit OS as posted by JJ.? There is no TZ= in the

Hi Gyula, Check that you do not have a TZ= line in the */home/pi/.profile* hidden file. 73 Evan AC9TU