开云体育

JJ here is a video of that volume anomaly I found.

I probably should have specified I am using a v2 board.

I didn't realize this was a thing until my original card was long lost. How would I go about calibrating or creating a new hw_settings?

IMHO that is one of the things this radio lacks.??I glad there is an option to buy a kit

Thank you all for sharing your trials and tribulations with the software build as I noticed some minor errors as well. * JS8Call is not setup to use the proper soundcard output * The KBD crash is

Yes, it works. Feel free to use the File Manager. First you copy it to a USB stick, then back to the new SD card. -- Gyula HA3HZ

Well, my problem is how can I copy the folder from the old card, does it work with copy/paste?

I recently received a version 5 ubitx that was damaged in shipment.? The speaker came loose in the case and broke some of the filter inductors loose from the board.? Is there a photo of this area to

So how does this “install” onto the sd card then? I am not fluent in these sorts of activities so I need a little help getting the disk written. Do you have a txt document detailing how to do

G'day Steve. JJ explained on his github page : * Copy over your hardware calibration settings file to (/home/pi/sbitx/data/hw_settings.ini) Apparently, the sBitx v3 should NOT be calibrated, only

Sorry, I was a bit hasty in describing the error. After I installed JTDX and started it, I saw that I had different times in different places. It's a 64bit OS as posted by JJ.? There is no TZ= in the

Hi Gyula, Check that you do not have a TZ= line in the */home/pi/.profile* hidden file. 73 Evan AC9TU

Should the calibration procedure be done when using this image, or does the settings file that I'd move across contain that information?

JJ, I had a little problem with the time display. I set the local time to Europe/Budapest, it displays it correctly. However, the sBitx time display is -2 hours, which should correctly be -1 hour. I

We still sell the AGC kit with analogue meter that works for any Transceiver including Bitx And Micro Bitx . https://amateurradiokits.in/product/agc-kit-for-bitx-and-ubitx/ Thanks and regards Sunil

you’re right, jerry. ? Not sure why, but the images are available in the linked article at the top of that page. thanks for the tip! gordon kx4z

Ahh.. it was related to booting with USB headphones jacked in.. that's a tricky gotcha. Sorry for the seemingly incessant posting.? it's the weekend and I was looking for a project.. lol

JJ on my first SD card burn my sbitx didn't start, I figured it was a bad copy so I made another and this one worked well. I rebooted and now when the sbitx is launched it immediately closes. fired it

I found that if I moved my taskbar to the bottom its even better. YMMV

Thanks for the build JJ. it runs well on a Sandisk SD and even better over USB3 The original SD that came with the rig is taped to the inside of the case for safekeeping, I had first tried the