开云体育

I have been checking out the new Macro Manager and i really like it. I think that it is a feature that I will get some use out of. Thank you for your hard work, I greatly appreciate it. -- '72 Aaron

Hi Dean, I burned the Si5351 in my DE.? I repaired it with an Adafruit clone board.? I found two lines (45 and 46) in the si5351v2.c program. //int xtal_freq_calibrated = 25012725; // crystal

A quick progress report on my efforts to improve KD8CEC to support modern 32 bit MCU's and standard tft screens like found on uBITX V6 and sBITX. In terms of board support, my current Raduino clones

Hello all, I’d like to know what your ideas are for the best way to learn to interact with the sBITX v3. Should I learn Linux, python, C+ etc…. What i’m?trying to do is learn how to download

Thanks for the reply.

I guess I'm confused still.? I understand that the sbitx FT8 built-in software saves it's log to a SQL file.? I have been using an exporter to convert that file to an ADIF file.? I use that to

Can you command the audio board to generate a 4 kHz tone and measure it on the waterfall? That might allow you to check the crystal.?? Or do the reverse ? Gordon Kx4z

Hi all - Seeking wisdom (to borrow a term from FFT lore) from the crowd about a frequency problem wiht my Homebrew SBITX.??if you happened to listen Soldersmoke #250 I talked about it there and I'll

But I had just great fun taking an old classic desktop Mic that I got at a ham fest and putting a four dollar element in it that has enormous output, (-24dB) and the doggoned thing works great!!! That

I agree. The stock mic is trash.... -JJ

If you removed a turn from the vfo, it should work... [email protected]> wrote:

Now I need some tutoring. Do I open and close the telnet socket each time I need to pass parameter, ( which could be 20 or so times per minute at times)? Or do I just open it when the program starts

I went through the mic thing with the SBITX DE edition. First issue was mic cable was unshielded!? RF? feedback issues even on a dummy load. Then I tried again with a shielded cable replacement ...

HOORAY -- just finally succeeded at opening a socket and passing a frequency to the V3.02 telnet server. TIME FOR LUNCH!!!? ?So many hours on this, but I'm learning!!! Gordon

On 2/12/2024 11:34 AM, Harald Holt wrote: > > There are several resorts about the bad SSB audio quality. In V3 of the software, the compressor was removed. The compressor was “horrible” according

There are several resorts about the bad SSB audio quality. In V3 of the software, the compressor was removed. The compressor was “horrible” according to Farhan. But even without any compression

I have a Bitx20 which was built from a Hendricks kit it is the 10 watt version. At the moment it tunes from 14150 to 14300. I would like to try and use it for POTA and SOTA, but most of that action

Great job, guys!? ?Upgraded to 3.02, then added the remote.c from W9JES and now I can telnet (from Putty) without the junk characters, and it reconnects when I stop and restart Putty! The telnet API

I have, thank you. Scotty

Scotty, Have you done any tests on a dummy load?? This would eliminate RF feedback as an issue. 73 Evan AC9TU