开云体育

PLEASE (I bought a board with no547)it did not issue at all after setting the location I changed the location for the US now it emits 1w on 80m3w on 20m, 22w on 15m and 17w on 10m, all using the same

Any chance that one of you guys would write me a C code subroutine(s) that is able to connect to their telnet interface (or any other interface to the Sbitx) and issue a command to change the

HOORAY!! For the first time, I have properly decoded a "frequency set" command from WINLINK, issued to a mythical ICOM radio [replaced by the sbitx running my standalone code] and correctly recognized

Hi Jonas, I changed it from the OS GUI, under “Raspberry Pi Configuration - Localisation”.. I think it is only one locale, ISO8859-1. Anyway tonight I’ll check! Lorenzo

Ashhar, I understand that it is easier to use Wi-Fi and TCP/IP. I agree that It is easy to set up an access point as you point out. As I see it, the problem is that these numerous and very important

Thanks Lorenzo. Did You enable all three en_US locales or only one? [image: image.png] And which one did You set as default? Regards, Jonas Den l?r 10 feb. 2024 kl 00:32 skrev Lorenzo IU5RDU via

That's a great blog, Dean - lots of useful insights. And I am impressed that Farhan has taken time out to offer you assistance. What an impressive forum this is! 73 Tony

The podcast was fun and it prompted me to update my blog - Take a look at my latest blog post: "Ground Bounce, Hallucinations and Wisdom" (

Gordon, First, to talk to the PC, an easier way is to use wifi and tcp/ip with hamlib's net rig ctrl. This involves no wires at all. Just that sbitx and the pc have to be on the same network. If you

sBITX Toolbox version 1.7 is now available. You can easily upgrade to the new version by pressing the Update button And as always... The release notes are? at

Thanks, that’s great information.

Hi Gordon - Very FB. I don't think the baud rate will affect SDR processing. Your code shouldn't block - it should just accumulate characters in an array of char until a carriage return (or whatever

THANKS, STeve!! The characters were actually going the right place -- where the code had sent them. I found my old code for driving a HEATHKIT SB102 from Winlink....and it interprets FT-897

Thanks for the replay Tony. I really have no idea about any of it. I picked it up fully assembled. Receives SSB and CW fine. I know it transmits, just not sure how well. Anything you can send me would

Gordon - This is a great project, and you're making progress! You will first have to add a few lines of code at the start of the sbitx program execution to open the /dev/ttyUSB0 serial port. Program

I recommend studying this description: *11. Logging* ( https://wsjt.sourceforge.io/wsjtx-doc/wsjtx-main-2.6.1.html#LOGGING ) -- Gyula HA3HZ

Talking to a 7300 might be easy, but it isn't the goal here.? ?We have to talk to a PC.? ?Apparently they make a cable just for this sort of thing, but I don't have one.? ?Using 2 UARTS that are

OK,? I know that 90% of the readership here doesn't see any reason that we need this.....but some of us see why it would expand the market and usefulness of this incredible radio. So sometimes I

I’m trying to get FLAMP working with FLDigi on my SBitx V2. FLDigi is working great using HamLib on all modes and when I open FLAMP I don’t get the “Mist start FLdigi first” message so I would

I meant to ask, are the database entries stored with the contact date as part of the key? I have log entries from two days, and only the second day shows when I hit the LOG button on the screen. How