开云体育

Start with AM band? and use cheap CB swr meter transmitting continous 1k tone. Tune antenna with trimmed feed line and keep it simple as possible On Tue, Feb 6, 2024 at 12:14 PM, DaveW,

David, Last summer, I also bought a uBitxV6 from gigaparts. After putting it together, I received reports of very poor audio quality on SSB xmt. There were issues with the microphone and also with

Hello David, As long as you are staying around the same frequency, ?the modulation mode should not impact the accuracy of the power measurement. ?The meter is not the issue. ?SSB transmission uses

I put the received card in the box, set only the code and the grid and tried = no output! help, where are the parameters received on paper? So I tried V 3.0 and nothing, I updated and still nothing

Just as a follow up, I did see something in the ebay ad now that I look at it again. They say: "Measurement range: 0.5W-120W (up to 210w. Used below 120w for long-term FM, AM, and CW modes. SSB mode

I did. Same situation. It almost is as an oscillation such as un neutralized tube finals. Same issue on other bands now. Later I will reroute wiring to try that out.

Hello Everyone! Just finished assembling the uBitx 6.1 (thanks gigaparts!) and I wanted to get a sanity check. I'm using my homebrew inverted V and a cheapie SWR/Power meter for testing. When using

Hi Scotty - It's possible that nothing died - you may be getting RF feedback. Can you try testing into a dummy load? 73; Steve, N3SB

I recently decided to get an sBitx V3 complete kit as a compact package for portable ops and as an integrated data modes TRX avoiding all the current connection issues with my main set.? It arrived

Well this is odd. In the middle of a cw qso on 20 meters, version 3 sbitx, the power went up to about 35 watts out with no code pulses showing up on external watt meter...just constant carrier. Going

It is funny how little is the distance between the all analog, minimal bitx20 and the sbitx. Not much is different but for the Si5351, a requirement for modes like the FT8. The rest is just the

There are things to be said for older radios where you don't need a degree in computer programming to use them.? One of mine is a "Bayou Jumper" from 4 State QRP group.? It doesn't even need a dial

I started with with a crystal set and listened to local and DX radio stations. Until recently my radios were all used, some in not so good condition. My friends used to say "he does not live in the

Cool! I will look into that this morning.

Modified for US and emits but very little, ie consumption 6 A output below 0.5w measured at output?

Hi Scotty; The work-around for this bug is to set the task bar at the top of the screen to auto-hide. A proposed software fix is on github being reviewed now. 73; Steve, N3SB

It looks to me by this thread, that one must always keep a working version available. First determine if it is software or hardware before opening to measure things. Gone are the days of just opening

Did you change the OS language, by chance? L.

I finally got my Sbitx yesterday and am working on setting it up. I noticed in cw mode the on screen keyboard is not available, and the button kbd/off shuts down the radio app. Is this one of those

Oh good! - f wrote: