开云体育

Note that the update script changes the working directory back to /home/pi/sbitx So, if you had created a separate directory to experiment with some code from the sbitx github, the update script is

Excellent! Works fine. But one odd problem is that when sending FT8 from sBitx and from Wsjtx it starts with a loud crack in the loadspeaker. (Sidetone in CW is 5) Any solution?

Owen, Thank-you -I will look into a ten turn 10k to replace with.

Evan, thank-you. I will check this as well.

Thank-you for that feedback, I will have to see if I can borrow one that has the capability, my astron does not.? I fear replacing again will cause problems with the pads lifting, so I will wait

Thanks, that is encouraging news! -- Regards, Dave, N1AI

Your observations are valid for sure. I want point out some things so we can all benefit from as much information as possible. #1: A few ALSA messages about underruns during startup are normal

Dave, From now on, I will clear the PRs. I am also looking for volunteers to co manage the merges with me. I am meeting mike papp tomorroe morning to put a system in place to quickly move the dev

I see you closed the cmake PR.? I also chose not to use that particular approach to using cmake.? If you look at the dev_main branch in the n1ai sbitx-mainline repo on github you can see the commits

Hi Gyula. You identified the issue! Thank you! I replaced *sbitx_sound.c* from my v3.0 snapshot in v3.02 then recompiled with *./build sbitx* No more ALSA sound errors and the audio glitch we

I am finally playing with Bookworm (on Pi 4) and this tip was very helpful, so thank you very much. One other observation was that the various screenshot/print-screen mechanisms were broken when

Andrea, All of the connectors on the uBitx have been Dupont style.? I have used non-keyed connectors in place of the provided keyed connectors.? I bought the connectors on Amazon, which most likely

Hi Evan, you are right, I forgot to mention that it is a Ubitx V6 from HF Signals.? Unfortunately they were not put on the PCB.? I only have P1 and P2 soldered on PCb. 73 de Andrea

Thank you Gyula. It's late here now, so I will give your suggestion a go tomorrow. 73 -- Pete VK3PYE

Peter, So first rename the currently used folder, e.g. to sbitxv3 or whatever you are currently using. Then after that: git clone https://github.com/afarhan/sbitx cd sbitx ./build sbitx then I copy

Peter, Yes, it must be done within the sbitx directory. I don't use the update, because then the previous version is lost, I keep it until I see that everything works fine. That's why I clone the

JJ - W9JES, When I tested pull requests, I left this last. It was #69 that made the change in sbitx_sound.c. As far as I know, it is to eliminate the occasional error by rebooting. The error was that

I tried the "./update" again (1015z today) and same result.? Both the terminal and the sbitx program report "v3.0". It seems to be running OK. Gyula HA3HZ suggests to do "./build" from the terminal

I had this with my v2, I replaced the bias pot with a 10 turn 10k and it was a much smoother adjustment. Don't know why they don't fit them anyway with the setting being so critical? G0RCL.

Which mode were you using and what was the bandwidth set? This has been reported earlier too. - f