开云体育

Thanks Barry I have a V2 case, but would like to add the attachment points like the V3 to it so when I design holders other people can also use them. -- 73 Bob? KD8CGH

If RF shielding is a concern, is it feasible (relatively simple?) to line the 3d printed plastic case with heavy duty aluminum foil, probably glued to the case? Spray glue maybe. 73 Roy

I made some changes to the app. Added the digital mode and added functionality for additional controls.

I probably will not get to work on this until Feb at the earliest. I have made several 3d printed cases for ?various ham projects. Even with fusion 360 it seems to take a couple days per piece to get

Bob, I only bought the board and sent a message to HFSIGNALS to find out if I could purchase the case. The box I have is just shy of 10 inches.. So far, I have not received a reply. Barry K3BO Sent

I'm planning on upgrading my V2 board to a V3. I'm intrigued by the mounting holes in the back of the V3 case and would like to design 3D printed holders for a battery and tuner. Is there a

Dave, I believe Peter did not have a fuse on the power feeding his radio.? The reverse protection diode will burn open if there is no fuse or crowbar circuit in the power supply to turn off the power

I don't think it is an issue of RF shielding, although in time we may learn that is a concern. I received my V3 board-only kit and it came with an acrylic board that is attached to the component side

I also see the imagination in this device.? I am sorry you are disappointed. This guess about everyone is false. I started a thread about the RPi5 just to try to understand any issues that could

Gordon, as I mentioned the markings and fail-safe connector to the outside have prevented any errors on my part. I noticed the error when I have had the rig opened up for other reasons. Seemed the

Yes, I read the message. Says someone who hasn't been making FT8 QSOs consistently. If he had done it, then the listed mistakes would have happened to him as well and he would have understood it

I also had the .profile issue on the stock image.? It is easy to fix once you know it is the issue. Based on a sample of two, with no other link than the stock image, I would agree that a fix is

Dave, A case like that would be very cool, I'm not sure if having a metal case helps shield the sBitx or from other sources of stray RF or if the case is helping shield other electronics from it.

If I understand /g/BITX20/message/106151 correctly, then the software is operating as intended. That message states:

Thank you for the rapid and forthright response. One part is unclear to me: Earlier Peter wrote: Do we understand why the reverse protection diode did not protect the components on Peter's board? --

Edit the FT8.mc macro file, I’d think. 73 Roy Sent from [Proton Mail](https://proton.me/mail/home) for iOS

1) sorry about that rogue “/“. Home directory for sure. 2) there must be something about the image being sent out with the V3 radios. this TZ export should not be in the sbitx user’s .profile

Hi, anyway to call CQ POTA when using FT8? ? Or maybe add the ability to a future release?

Okay, thanks for the info, with RDG and Ken's help I was able to find and comment out the line mentioned and now the time is correct. Thanks again. Joel N6ALT

The / would imply the root directory, but I suspect it is the user's home directory. The period in the first character position in the file name makes it 'invisible', you should be able to 'see' it