开云体育

David, The supply that you have does produce enough current.? It is a voltage lower than the 13.8 volts supplied by your main rig supply that is reducing the output. Since purchasing through

Hi The one i bought

Hi all, I'm looking to upgrade the firmware on my uBitX v.6. I don't mind the UI but as a CW operator I constantly have issues with the CW keyer, which seems to want to add extra dits or dahs now

Thank you, Terry - I should have spotted that: of course it's the VAT @ 20% + DHL's handling fee for collecting it. The sBitx tax will be the same, so around the $100 mark. I think I'll be ordering a

Those look great! We routinely Run Icom 7300 thru ours with 4 low RDSon devices without heat sinks — all depends on what resistance. Use a few of those devices in parallel to get same

Thank you for your update.

I like your multiple FET option! Why am I not surprised that your documentation is excellent?! 73, Andy

Doc Gibby, I've been using PowerPoles on all of my gear, and one of Third Planet Solar/KC9ON FET-based reverse polarity boards on all of the DIY equipment.? I like the very low voltage drop through

There should not be any import duty on amateur radio gear or kits in to the UK only VAT. If DHL is charging you duty, they are ripping you off. The commodity code was 8525600000 in 2017, so you may

Has anyone here ordered an sBitx for delivery to the UK? If so, what import duty were you charged on the shipment? Last year, I ordered a uBitX at $209 & my duty came to ?42 (around $53). At that

I can do even better than that. You can order it directly from PCB way https://www.pcbway.com/project/shareproject/13_8VDC_Polarity_Protector.html

Hello Gordon Is it possible for you to provide me with the Gerbers files for the assembly or do you still have PCBs? 73 QRO Gilles F1BFU

Yes. Absolutely will make the square line project files available. I believe that there is a branch defined already for it on my GitHub (GitHub.com/aj6cu) Unfortunately it is not updated to the

Hi Friends We have a fresh stock of Airpal Dual? Transciever kit for 20Mt And 40Mt available in limited quantity. The kit is available on our websites . 1. https//amateurradiokits.in For US buyers

Hi David, The lower voltage will produce lower power. I can not check the specifications of the 12-volt supply as the link does not work. 73 Evan AC9TU

Hi I bought the power supply and it works but when i use the 25 amp supply which is putting out 14 volts dc the ubitx 6 puts out 12.8 watts cw 80 meters and 5.9 watts cw 20meters. with this 12 volt

Is there any possibility of sharing the SquareLine project files?

So I transferred the compiled file on to my new 5" E device, and all seems well. Now on to putting the Raduino together and checking out the rest of the control hardware - I am building in a Amateur

Yes indeed, I ended up in that contributed screens directory, and have since checked and compiled the HMI file using the latest Nextion editor. Apologies for the confusion, I'm new to this project and

Looks correct for the EDC code… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner