开云体育

Hi, I’m installing a Raspberry Pi 4 in the Sbitx v2 that I bought recently at the Hamvention. ?Can anyone tell me whether there is enough clearance to place those tiny stick-on heat sinks on the

Dave, I’ve probably had more experience changing finals and working with their heat sinks both for the DE and theV2 than most out here. I don’t think that most blown finals are because of heat

Just a reminder we now have a Discord. We have almost 70 people in there now. https://discord.gg/vKYQSqudQJ

Thanks!! 73, Dave?? AB7E

Dave, Feel free to use a larger SD card for continuous use. Currently, 9GB of the 32GB or 64GB is used. -- Gyula HA3HZ

I would say that yes, you should strongly consider a different mechanism for securing the PA transistors to the heat sink.? You mentioned elsewhere that you have had 20-25 failures out of 500

Please excuse me if this is a dumb question ... I'm a total noob when it comes to the RPi.? But is there a reason why simply using a 64 GB card isn't advisable?? The cost differential is

LoopMasta, The voltages you listed do not make sense.? A zero volt on the Drain of Q28 and 12 volts on the diodes would mean that L27 is open.? Can you verify that there is continuity across

Using Felt thats not thick enough, just double or triple up layers. TenTec did that for the Corsair and possibly other radios. Cheers Barry Sent from Mail for Windows Sent: Monday, May 29,

I will have a chart for you in two days. - f [email protected]> wrote:

On Sun, May 28, 2023 at 05:00 PM, Evan Hand wrote: Hi Evan. Thanks for your answer. > > I do not have a V2, so I can not give you actual voltage or oscilloscope > waveforms.? Reviewing the

Hi All, I’d vote for a short press of the tuning encoder to execute tuning lock leaving the long press for something else. A dial lock indicator would be nice. Cheers, Scott

It is a bond that cannot be disassembled under the influence of heat. The thread is a releasable joint, another thing. And it is precisely the female thread that must be fixed so that it does not

If someone is having trouble because they cannot copy the image to a 32GB SD card, because there is a few bits less space on the card. I recommend the following: The solution may be to first copy the

Yes, renaming the unzipped file is enough. - f

Hi, when I unzipped the latest soft for V2 I realized that there is no extension in the file name. I expected .img or .iso file. Is it ok to just rename it with .img to be burned correctly on SD card

I have some notes and suggestions that may be helpful to some of you. If you already know some of these points, fine. I have the V2 working. At first the factory SD card wouldn't function. (First boot

Red thread lock would be ample and easy to disassemble with just a drop. [email protected]> wrote:

I am suprised you haven't found any takers so far! I can take a secondary role only

This is very interesting! I am willing to provide any required tech assistance. I alreay have this blog - itshamradio.com ( https://itshamradio.com ). I am willingly to a wingman to this awesome map