开云体育

I would say that yes, you should strongly consider a different mechanism for securing the PA transistors to the heat sink.? You mentioned elsewhere that you have had 20-25 failures out of 500

Please excuse me if this is a dumb question ... I'm a total noob when it comes to the RPi.? But is there a reason why simply using a 64 GB card isn't advisable?? The cost differential is

LoopMasta, The voltages you listed do not make sense.? A zero volt on the Drain of Q28 and 12 volts on the diodes would mean that L27 is open.? Can you verify that there is continuity across

Using Felt thats not thick enough, just double or triple up layers. TenTec did that for the Corsair and possibly other radios. Cheers Barry Sent from Mail for Windows Sent: Monday, May 29,

I will have a chart for you in two days. - f [email protected]> wrote:

On Sun, May 28, 2023 at 05:00 PM, Evan Hand wrote: Hi Evan. Thanks for your answer. > > I do not have a V2, so I can not give you actual voltage or oscilloscope > waveforms.? Reviewing the

Hi All, I’d vote for a short press of the tuning encoder to execute tuning lock leaving the long press for something else. A dial lock indicator would be nice. Cheers, Scott

It is a bond that cannot be disassembled under the influence of heat. The thread is a releasable joint, another thing. And it is precisely the female thread that must be fixed so that it does not

If someone is having trouble because they cannot copy the image to a 32GB SD card, because there is a few bits less space on the card. I recommend the following: The solution may be to first copy the

Yes, renaming the unzipped file is enough. - f

Hi, when I unzipped the latest soft for V2 I realized that there is no extension in the file name. I expected .img or .iso file. Is it ok to just rename it with .img to be burned correctly on SD card

I have some notes and suggestions that may be helpful to some of you. If you already know some of these points, fine. I have the V2 working. At first the factory SD card wouldn't function. (First boot

Red thread lock would be ample and easy to disassemble with just a drop. [email protected]> wrote:

I am suprised you haven't found any takers so far! I can take a secondary role only

This is very interesting! I am willing to provide any required tech assistance. I alreay have this blog - itshamradio.com ( https://itshamradio.com ). I am willingly to a wingman to this awesome map

I'll bet that knob costs a little more than $10. ? I've heard about felt on the back of tuning knobs. I tried it on my K-1, but I didn't have a thick enough piece and didn't really want to cut the

I updated to the latest version of sbitx. The rtc now works as expected.

The Elecraft rigs have a felt pad added to the bottom of the knob that increases the friction. The closer you have clamped the knob to the panel, the tigher is the tuning. If you want the best, here

Thinking about this later, I have heard of people using Elmer's glue for this which would be much cheaper. I don't know if I've heard of anyone doing it in plastic, but I think it would

I would like to see this also, at least for the power setting as I have done just that. Or I am thinking of adding a 2nd encoder just for volume. If I only had time to work on the software for this!