开云体育

Hi Goody (and Ashhar), No need to apologize. ?I asked. ?Thank you very much for the guide/details. Ok… time to jump. Geronimo!

OK. It was unclear from the lengths of the leads on the regulator where exactly to go. That point was the closest ground I could find, and have the white and red leads still reach the LM338 location

Agreed; I’ve been running off of Ethernet. I do all my development work via SSH and VNC. Networking is a must! :-)

Hi Shirley, Thanks for posting your experiences with this upgrade. My rig has a 47 uF cap in that spot as well, not 470 uF as is on the schematic. I think it would be easier for folks to cut out the

Sigi, You can easily blow the pi, display and the digital board if the ground is not soldered firmly. - f siegfried.jackstien@...> wrote:

Paolo, Perhaps, the inductance is very low. What is the diameter and length of the tube that is used to wind the coil and how many turns have you added? A picture will help. - f

Hi, The schematic you can find here: https://github.com/afarhan/sbitx/blob/main/sbitx_main.pdf In the same directory there is the schematic of the digital part as well. You can find a detailed

I've built my own PTO without 3d printer. I used? 4 small PCB boards (25x20mm) using a 9mm diam. old? pen and 2 nuts soldered. Instead of common nuts I used 2 parts from Fisher gussets diam 6mm. I

Try one of these attached. 73 Evan AC9TU

*Hi John, been looking for the enhanced 28 file myself, but only other screen sizes found. could you possibly * let *me have a copy thanks Art g3xne*

forget about my last post .... sorry did not read carefully (you wrote it is SOLDERED to the ground lug?!?) ... so ok on that dg9bfc sigi Am 12.09.2022 um 12:34 schrieb lou_w2row:

i would try to find a better ground spot as to clamp it under a screw ;-) dg9bfc sigi Am 12.09.2022 um 12:34 schrieb lou_w2row:

Attached is a picture (if I can figure out how to attach one) of a factory modified sBitx which I received from my basic kit order last week. The black (ground) wire is soldered to the pad under the

*Hi Mark, do you have the nextion enhanced 2.8 screen firmware. am looking for a hex file to use with xloader. or whatever * you may suggest..

Hello everyone. My name is EBARA from Japan. My call sign is JE1JGC. I have ordered "sBitx Fully Assembled" and am waiting for it to arrive. In order to use sBitx in Japan, you need to follow a

Hello, see this post [email protected] | Some calculations on the IF filter and USB filter (

Which model of Bitx is this ? Sounds like some SMPS spurs drifting. Raj, vu2zap

*Hi all, has anyone got the 2.8 Nextion enhanced files available, can only find 3.2 inch, would appreciate your help. * Art G3XNE

My bitx has fixed noise issue from 21.3180 to 21.3480 Mhz ,how to fixed that noise. Attechment bellow

Yes, I have been collecting the screens. They were scattered all over and was hard to find for a new owner of a uBITX. I am sure that there are some hidden gems there. On my todo list to try a few.